Can-Am Maverick R XRC Or MAX Chromoly Tube Straight Radius Rod Kit | AVID Racing

Can-Am Maverick R Rear Chromoly Radius Rod Kit, 1.25" Tube The AVID Racing Maverick R Rear Chromoly Radius Rod Kit is built from 1.25 inch x .125 wall 4130 chromoly tubing and designed specifically for the Can-Am Maverick R rear suspension. The lower rod uses our machined stem cup uniball design for maximum strength at the hub, while the center and upper rods use adjustable 3/4 inch spherical rod ends so you can fine tune alignment and keep the rear of the car tight under race use. What This Means on the Car Direct Maverick R Fitment: Correct lengths and spacers for the Maverick R rear suspension with proper clearance through the full travel range. No guessing and no custom cutting. Race Ready Strength: 1.25 inch x .125 wall 4130 chromoly tube combined with 3/4 inch rod ends and our stem cup uniball lower mount handles hard hits, big whoops, and race abuse far better than the factory radius rods. Stronger Lower Connection: Machined stem cup uniball at the lower rod spreads load into the hub and gives a precise, smooth pivot compared to the stock bushing style joint. Adjustable Alignment: Center and upper rods use threaded 3/4 inch rod ends so toe and thrust can be set correctly and kept in spec after hard use. Clean Install: All misalignments and spacers are matched so the complete radius rod system bolts together like a finished kit. Included in Kit Lower 1.25 inch 4130 chromoly radius rods with AVID machined stem cup uniball assemblies Center and upper 1.25 inch 4130 chromoly radius rods with 3/4 inch adjustable spherical rod ends All required misalignment spacers for chassis and hub connections Installation hardware where applicable