Rear Straight Squeegee Blade (#MPVR08035) for IPC Eagle 20" & 24" Floor Scrubbers - Red Latex

This red latex rubber rear squeegee blade fits the IPC Eagle 20" and 24" automatic floor scrubbers (specifically fits the CT40B50, CT40BT50, CT70B50, CT70BT50 & CT70BT60 models). It is a replacement blade that fits perfectly onto the squeegee assembly on the rear of the IPC Eagle 20" & 24" walk behind & ride-on automatic floor scrubbers. For a completely new squeegee assembly that replicates what you received with your new scrubber, you'll also have to order a new front replacement squeegee along with this rear blade. This will allow you to start recovering solution like the machine is new again. We recommend using a defoaming solution in your recovery tank to preserve vacuum motor life & make sure your auto scrubber is operating at as close to 100% as possible. Each squeegee blade can be used on all 4 sides. You can use the front side of the squeegee, then rotate, so the back side is facing forward. Once those 2 sides are compromised, you can then flip it upside down, and use both of those surfaces. Squeegee change outs are easy because no tools are required to switch them out. We recommend rotating your squeegees every 20 hours of scrubbing, so they wear evenly. *Please Note: Any rear squeegees bought for 20" & 24" auto scrubbers with serial numbers before 8000189164 for 20" machines and 8000189411 for 24" machines should purchase the MPVR45195 squeegee. You can order these older model squeegees by calling customer service at 1-888-722-5508. The older MPVR45195 squeegee is more expensive than this current model.