Autel Smart Controller for EVO II Series

The Autel Smart Controller for EVO II Series has been designed to enhance your flying experience with Autel EVO II series aircrafts. The Autel Smart Controller features a 7.9 inch super-bright display at 2000 nits of brightness. This brightness is four times brighter than conventional mobile devices, smartphones and tablets. This brightness enhances your UAS operation during direct sunlight to reduce glare and provide clear screen visibility. Operating time peaks at 4.5 hours on a single charge at 50% brightness, and 3 hours at maximum brightness. 128GB of internal storage gives you plenty of space for apps, media and other storage needs on the Smart Controller itself. The Autel Smart Controller runs on a customized Android operating system and provides full support to download third party apps on the Smart Controller itself. This gives EVO II operators flexibility to create an operating system and workflows that are specific to their exact needs. Autel Smart Controller Features 7.9" 2000-nit Super-Bright Screen with Anti-Glare Coating 4.5 Hour Battery Life (3 hours at maximum brightness) 128GB of Internal Memory 8 Mile Image Transmission at HD 1080p Customized Android operating system Samsung 8-Core Processor Tri-Band Frequency Ready HDMI Video Output Port Specs Autel Smart Controller Specifications Image Transmission Max Signal Transmission Distance (No interference, No obstacles) FCC: 13 km (8 miles) CE: 7 km (4.3 miles) MIC: 7 km (4.3 miles) SRRC: 7 km (4.3 miles) Wi-Fi Protocol Wi-Fi Direct, Wi-Fi Display, 802.11a/b/g/n/ac Supports 2 x 2 MIMO Wi-Fi Working Frequency 2.400-2.4835 GHz 5.150-5.250 GHz 5.650-5.755 GHz 5.725-5.850 GHz 902-928 MHz Battery Capacity: 5800mAh Voltage: 11.55V Battery Type: Li-ion Battery Energy: 67 Wh Charging time: 120 minutes Operating Time ~3h (Max Brightness) ~4.5h (50% Brightness) Internal Storage 128GB Video Output Port HDMI Port USB-A Voltage/Current 5V/2A Operating Environment Temp -4°F to 104 °F Storage Temperature -4°F to 140°F (within a month) -4°F to 113°F (between one to three months) -4°F to 73°F (one year) Charging Environment Temperature 32°F to 104°F Supported Aircraft EVO II Series Version 1 Aircrafts Satellite Positioning Module GPS + GLONASS + Galileo Dimensions 303×190×87mm (with antenna folded) 303×273×87mm (with antenna unfolded) Weight 2.53 lbs (without protection case) 2.75 lbs (with protection case) In the Box (1) 7.9" Smart Controller (1) Smart Controller Protective Case (1) AC Power Adapter (1) Type-C USB Cable (1) Chest Harness Strap (1) Pair of Spare Controller Sticks (1) Quick Start Guide Compatibility Please note there are V1 and V2 versions of the Autel Smart Controller and they CANNOT be used interchangeably. V1 is only compatible with EVO II V1 drones, and V2 is only compatible with EVO II V2 drones. A Smart Controller V2 is NOT compatible with a V1 drone, and vice versa. For more information on Autel Robotics' V1 and V2 versions, please read here: Autel Robotics EVO II Version 2 Announcement If you purchased your Autel EVO II before June 2021, it would be a Version 1 (V1). If you purchased your EVO II after that date, it does not guarantee you that you have Version 2 (V2). V2 EVO II drone units are marked with "V2" on the top of the aircraft between the vision sensors. V1 EVO II drone units do not have any marking. FAQ Frequently Asked Questions 1) Is the Autel Smart Controller compatible with the EVO I? No, the Autel Smart Controller is only compatible with the EVO II Series. 2) Can you install 3rd party apps on the Autel Smart Controller? Yes, the Smart Controller runs on a customized Android operating system and provides full flexibility for users to be able to download and install third party applications onto the operating system. 3) How long is the battery life of the Autel Smart Controller? At maximum brightness, you can expect about 3 hours of runtime. At 50% brightness, you can expect about 4.5 hours of runtime. Please note these runtimes will vary based on operating temperature and applications being used on the operating system. 4) Can I live stream from the Autel Smart Controller? There will be ways to live stream from the Smart Controller in the near future, and also by using third party applications. The Autel Smart Controller has an HDMI out port which can be connected to 3rd party live streaming solutions as well. 5) Are the antennas detachable and can they be upgraded or attached to an antenna mast on a command vehicle? Yes, the antennas are detachable and use an SMA connector. They can be upgraded with SMA compatible third party devices but users will be making third party upgrades and modifications at their own risk. Videos Autel Smart Controller Unboxing Videos Hear about and see the Autel Smart Controller from Advexure customers as they unbox their own Smart Controllers for their EVO II's. These are real Advexure customers and have not been asked nor influenced in the making of the below videos. 😊