Audix FP5 Fusion 5 Mic Package

5-piece Fusion Drum Microphone Package The FP5 Drum Pack contains a combination of f2, f5, and f6 dynamic microphones. The f5 is tuned for snare drum and can be used as well for bongos, timbales, guitar cabinets, and acoustic instruments; the f2 is ideally suited for rack and floor toms, congas, djembe, bongos, timbales, brass, and woodwind instruments. The f6 dynamic microphone, with its extended bass response, is designed for kick drum, bass cabinets, cajon, and other low-frequency instruments. Built to withstand the rigors of live stage applications, the Fusion Series mics are also excellent for rehearsal, school, house of worship, and a wide variety of home recording applications. Includes an aluminum road case, (3) F2 rack and floor tom mics, (1) F5 snare mic, and (1) F6 kick drum mic. More The f2 and f6 microphones are supplied with the DCLIP, a heavy duty nylon stand adapter with snap-to-fit design; the f5 is supplied with the MC1 mic clip. Each clip comes with a 3/8” thread adapter which is mainly used with European mic stands. The following are some ideas as to how the microphones in the packs interact with each other. Snare and toms: As a general rule, the f5 and f2 are designed to be close mic'ed. A good starting point is two inches above the rim with the mic pointing toward the center of the head. For more “rim” sound, pull the mic back closer to the rim. For more resonance and depth of field, pull the mic further away from the head. The trick is to find the right balance between resonance and controlling bleed from the other drums. Kick drum: The f6 is the kick drum mic. A great accessory to help position the f6 is the STANDKD, which is specifically designed for that application. To position the f6, a good starting point is to place the mic inside the front hole of the kick drum, pointing toward the beater. (Tip: be sure that the grill is completely inside the hole). For more attack, move the mic closer toward the head, making sure not to position the mic right in front of the beater.  Features All-in-one solution for drum miking Features 5 instrument-specific mics for optimal results Cost effective and durable Audix quality + Aluminum case 1x f5 dynamic (snare) 3x f2 dynamics (toms) 1x f6 dynamic (kick) Specs F2  Transducer: Dynamic Frequency Response: 52Hz - 15Hz Polar Pattern: Hpercardioid Output Impedance: 580 ohms Sensitivity: 2 mV / Pa @ 1k Max SPL: ≥139 dB Off-Axis Rejection: ≥20 dB Material: Zinc Alloy/ Black Finish  Weight: 247 g / 8 oz Length: 104 mm / 4.09 in  F5 Transducer: Dynamic Frequency Response: 55 Hz - 15 kHz Polar Pattern: Hypercardioid Output Impedance: 580 ohms Sensitivity: 2.2 mV / Pa @ 1k  Max SPL: ≥137 dB Off-Axis Rejection: ≥20 dB Material: Zinc Alloy/ Black Finish Weight: 283 g / 10 oz Length: 145 mm / 5.7 in F6 Transducer: Dynamic Frequency Response: 40 Hz - 16 kHz Polar Pattern: Hypercardioid Output Impedance: 580 ohms Sensitivity: 1.2 mV / Pa @ 1k Max SPL: ≥140 dB Off-Axis Rejection: ≥23 dB Material: Zinc Alloy/ Black Finish Weight: 311 g / 11 oz Length: 121 mm / 4.76 in