Audio-Technica AT-VM95ML/H Headshell/Cartridge Combo Kit

The AT-VM95ML/H combo kit includes the AT-VM95ML dual moving magnet cartridge premounted on the AT-HS6BK headshell. Features: VM dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus Aluminum cantilever Specially wound coils increase output voltage Durable low-resonance polymer housing Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required Compatible with any AT-VMN95 replacement stylus Universal ½"-mount headshell for 4-pin turntable cartridges   Specifications Frequency Response 20-25,000 Hz Channel Separation 23 (dB at 1 kHz) Vertical Tracking Angle 23° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Nude square shank Recommended Load Impedance 47,000 ohms Coil Impedance 3.3 k ohms (1 kHz) DC Resistance 485 ohms Coil Inductance 550 mH (1 kHz) Output Voltage 3.5 mV (1 kHz, 5 cm/sec.) Output Channel Balance 1.5 dB (1 kHz) Stylus Shape 2.2 x 0.12 mil Microlinear Cantilever Aluminum pipe Static Compliance 20 x 10 – 6 cm / dyne Dynamic Compliance 10 x 10 – 6 cm / dyne (100 Hz) Mounting Half-inch Dimensions Cartridge 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D; Cartridge & Headshell 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver Model  AT-VM95ML/H Mounting Feature Half-inch mount Recommended Load Capacitance 100 to 200 pF Replacement Stylus AT-VMN95ML Stylus Size 2.2 x 0.12 mil Type VM Stereo Dual Magnet Weight Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz) Wire Used for Coil T.P. Copper