Audio-Technica AT-VM95EN Phonograph Cartridge

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. Features: VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus Aluminum cantilever Durable low-resonance polymer housing Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required Compatible with any AT-VMN95 replacement stylus   Specifications Frequency Response 20-23,000 Hz Channel Separation 22 (dB at 1 kHz) Vertical Tracking Angle 23° Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Nude round shank Recommended Load Impedance 47,000 ohms Coil Impedance 3.3 k ohms (1 kHz) DC Resistance 485 ohms Coil Inductance 550 mH (1 kHz) Output Voltage 3.5 mV (1 kHz, 5 cm/sec.) Output Channel Balance 2.0 dB (1 kHz) Stylus Shape 0.3 x 0.7 mil elliptical Cantilever Aluminum pipe Static Compliance 20 x 10 – 6 cm / dyne Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz) Mounting Half-inch Cartridge Weight 6.1g Dimensions  17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver Model AT-VM95EN Mounting Feature Half-inch mount Recommended Load Capacitance 100 to 200 pF Replacement Stylus AT-VMN95EN Stylus Size 0.3 x 0.7 mil Type VM Stereo Dual Magnet Weight 6.1 g (0.22 oz) Wire Used for Coil T.P. Copper