Audio Technica AT-VM95EN/H Headshell Cartridge Combo

Audio Technica AT-VM95EN/H Introducing the Audio Technica VM95 Series cartridge featuring a 0.3 x 0.7 mil elliptical nude stylus, specifically designed for half-inch mount turntables. This cartridge excels in providing exceptional channel separation and low distortion, ensuring an unparalleled tonal quality. The robust, low-resonance housing comes equipped with threaded inserts, allowing for easy mounting to the headshell using just two screws – no nuts required. Adding to its versatility, the VM95 Series cartridges share a common body, enabling the interchangeability of the stylus with any of the six replacement options available in the Audio Technica AT-VMN95 series. Elevate your audio experience with the precision and flexibility of the Audio Technica VM95 Series cartridge. Audio Technica AT-VM95EN/H Specifications Frequency Response: 20-23,000 Hz Channel Separation: 22 dB at 1 kHz Vertical Tracking Angle: 23° Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Nude round shank Recommended Load Impedance: 47,000 ohms Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Coil Inductance: 550 mH (1 kHz) Output Voltage: 3.5 mV (1 kHz, 5 cm/sec.) Output Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Aluminum pipe Static Compliance: 20 x 10 – 6 cm / dyne Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz) Mounting: Half-inch Cartridge Weight: 6.1g Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver Model: AT-VM95EN Mounting Feature: Half-inch mount Recommended Load Capacitance: 100 to 200 pF Replacement Stylus: AT-VMN95EN Stylus Size: 0.3 x 0.7 mil Type: VM Stereo Dual Magnet Weight: 6.1 g (0.22 oz) Wire Used for Coil: T.P. Copper