Atomic Strive 10 GW Alpine Binding

Release 3 to 10 All-Mountain Alpine Binding Atomic Strive 10 GW Alpine Binding The Atomic Strive 10 GW is an all-mountain alpine binding for lighter skiers and progressing intermediates who need a release range that goes genuinely low. A 3 to 10 range covers skiers from 31 kg on up, which reaches further down than most adult bindings manage, and the Mono Heel Light holds it at 920 g per binding. Automatic toe adaptation handles alpine and GripWalk soles without a part being changed. Expert Review Setup and compatibility reviewed by CCBB technicians. Is This the Right Binding for You? Best For Lighter and progressing skiers between 31 and 100 kg who need a low release setting on a light, reliable resort binding. Consider Another Binding If You need a release value above 10, you want a touring mode, or your boots have touring soles rather than alpine or GripWalk soles. CCBB Binding Ratings Descent Security 4/5 3 to 10 release range, TUV certified Power Transfer 3/5 Low profile chassis, Mono Heel Light Ease of Entry 4/5 Automatic toe adaptation, Backroller technology Serviceability 4/5 Locking brakes, 28 mm adjustment range Rating scale: 5 = top of its class, 4 = excellent, 3 = good, 2 = specialized or below average, and 1 = limited. CCBB Binding Profile Release Range3 to 10, TUV certified CertificationTUV certified to ISO 13992 for adult alpine soles Brake Width90, 100, and 115 mm Riser HeightsNone, alpine binding Crampon CompatibleNo Boot CompatibilityAlpine and GripWalk adult soles Adjustability28 mm Skier Weight31 to 100 kg (66 to 220 lbs) Why We Like It The 3 to 10 range reaches down to a 31 kg skier, which covers lighter adults and growing juniors that many adult bindings cannot set for. Backroller technology in the heel smooths step-in and reduces the effort needed to click in, which matters most for lighter skiers. At 920 g per binding it is the lightest binding in the Strive line, and 10 g under the Strive 12 GW. Automatic toe adaptation handles alpine and GripWalk soles with no part to change, removing a common mounting error. Best Uses Daily-driver resort setups for lighter skiers Progressing intermediates moving off a system binding Skiers between 31 and 100 kg All-mountain skis 80 to 100 mm underfoot Boots with alpine or GripWalk soles Mounting and Setup Advice We mount the Strive like any alpine binding, and the 28 mm adjustment range covers a boot sole length change within a size or two without a remount. Brake width should match the ski waist or run to 5 mm wider. Bring the boots you will ski so the shop can set forward pressure against the actual sole. Auto GripWalk compatibility is the part worth understanding. The toe adapts to an alpine or a GripWalk sole without a part being swapped, which removes the commonest mounting error we see on bindings that need a manual change. It does not extend to touring soles: an ISO 9523 sole is outside what this binding is certified for, whatever the toe appears to accept. Mounting and release settings must be set and tested by a certified technician against your boot sole length. 📏 Technical Specifications Manufacturer specs · Click to expand Release and Fit Weight920 g per binding Release Range3 to 10, TUV certified Skier Weight Range31 to 100 kg (66 to 220 lbs) Adjustment Range28 mm Brake Widths90, 100, and 115 mm HeelMono Heel Light Features and Compatibility Boot CompatibilityAccepts ISO 5355 (Alpine) adult soles and GripWalk (ISO 23223) adult soles. Not compatible with ISO 9523 (Touring) soles or with pin/tech boot fittings. CertificationTUV certified. Auto GripWalk compatible, so the binding adapts to the sole rather than needing a part changed. ToeLDN toe with automatic toe adaptation ChassisLow profile chassis with light construction BrakesLocking brakes with a snow scraper FeaturesLDN toe, Mono Heel Light, light construction, automatic toe adaptation, Backroller technology, locking brakes, snow scraper, Auto GripWalk compatible Riser HeightsNone. This is an alpine binding with no touring mode. Compare the Atomic Strive 10 GW Strive 10 GW vs. Atomic Strive 12 GW The Atomic Strive 12 GW covers 4 to 12 for skiers to 120 kg with a 3-Part Heel Light, at 930 g per binding. The Strive 10 GW reaches lower, from a release value of 3 and a skier weight of 31 kg, with a Mono Heel Light. The setting your shop calculates decides this, not preference. Shop the Atomic Strive 12 GW Strive 10 GW vs. Atomic Strive 14 GW The Atomic Strive 14 GW is the freeride end of the line, reaching 14 for skiers to 140 kg at 1,002 g per binding. The Strive 10 GW is the light end, from 3 for skiers from 31 kg. They serve opposite ends of the same range and do not overlap much. Shop the Atomic Strive 14 GW Strive 10 GW vs. Marker Squire 11 ID Skiers cross-shop these as light all-mountain alpine bindings. The Marker Squire 11 ID reaches 11 and starts at 3. The Atomic Strive 10 GW tops out at 10 and adapts to GripWalk soles automatically. Both suit lighter skiers, so the calculated setting decides it. Shop the Marker Squire 11 ID Common Questions Who should buy the Atomic Strive 10 GW? Lighter and progressing skiers between 31 and 100 kg who need a release setting that goes genuinely low. The Atomic Strive 10 GW covers settings that most adult bindings cannot reach, on a light resort binding. What boots work with the Atomic Strive 10 GW? Alpine and GripWalk soles, in adult sizes. Accepts ISO 5355 (Alpine) adult soles and GripWalk (ISO 23223) adult soles. Not compatible with ISO 9523 (Touring) soles or with pin/tech boot fittings. The toe adapts between alpine and GripWalk automatically, with no part to change. Can I use touring boots in the Atomic Strive 10 GW? No. The Atomic Strive 10 GW is certified for ISO 5355 alpine and GripWalk adult soles only. A touring sole sits outside what this binding is tested for and must not be used even if it appears to fit. Touring soles need an MNC binding. Is the Atomic Strive 10 GW strong enough for an advanced skier? It depends entirely on the setting your shop calculates from your height, weight, age, boot sole length, and skier type. If that number lands at or below 10 with headroom, the Atomic Strive 10 GW is appropriate. If it lands at the top of the range, move to the Strive 12 GW instead. What brake width should I choose for the Atomic Strive 10 GW? Choose a brake that matches your ski waist width or runs to 5 mm wider. The Atomic Strive 10 GW is offered in 90, 100, and 115 mm, though not every colorway carries every width. Does the Atomic Strive 10 GW need to be set up by a technician? Yes. Release values must be set and tested on a calibrated jig by a certified technician against your boot sole length, and forward pressure is set to the specific boot. This matters more at low settings, not less. Our Verdict The Atomic Strive 10 GW earns its place at the bottom of the range rather than the top. A 3 to 10 release range reaches down to a 31 kg skier, Backroller technology makes stepping in easier for someone who does not weigh much, and the whole binding comes in at 920 g. There is no touring mode and touring soles are outside its certification. For a lighter skier on an all-mountain resort ski, it is the right tool, and skiers whose calculated setting reaches 10 should take the Strive 12 GW instead.