ATOM S30 [Used]

ATOM S30 PRODUCT VIDEO: Description: The all new ATOM marine series of amplifiers gives you the best of both worlds! Small footprint and big power! These amps also have great features like a built in volt meter and a microphone. The ATOM S30 is a class A/B 4-Channel high power amplifier with 2,400 watts peak output and 600 watts true RMS power. The RMS power is tested on a dyno using the certified run. It puts out 150 watts x 4 channels at less than 1% THD at 14.4 volts. We give the true power and the peak rating so you can easily compare this amp to any brand on the market regardless of how they like to rate their products.The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc. The ATOM S30 includes a PA microphone allowing you to make announcements to your friends and family. This is important for safety and it is also fun. This amp has enough juice to power either (8) speakers, (4) speakers, (2) subwoofers or a combination of subwoofers and speakers. It is also perfect for mids and tweeters. This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that the crossover supports low pass, full, and high pass. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, midrange speakers, and even tweeters. In high pass mode we allow you to filter out the lower frequencies (cut-off frequency adjustable between 50Hz - 250 Hz). In low pass mode we allow you to filter out the upper frequencies (cut-off frequency adjustable between 50Hz - 250 Hz). In full mode you will not be filtering any frequencies. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire. The other cool thing is that this amp has 2 of these crossovers. Every 2 channels has its own set of advanced filters. So if you wanted you can use 2 channels for subwoofer(s) and the other 2 channels for full range speakers. This amp utilizes high grade marine components including a conformal coated PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink casing including the bottom plate is made of stainless steel which is rustproof. The end panels, the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new! What's in the Box: Amplifier PA microphone Birth sheet with Dyno-tested power Mounting Screw Kit Owner’s manual Warranty Features: Rockville ATOM S30 2400 Watt Peak/600 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc) 2 Ohm: 150 Watts x 4 Channel <1% THD+N @ 14.4 Volts 4 Ohm: 100 Watts x 4 Channel <1% THD+N @ 14.4 Volts 4 Ohm Bridged: 300 Watts x 2 Channel <1% THD+N @ 14.4 Volts Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc) 2 Ohm: 600 Watts x 4 Channel 4 Ohm: 400 Watts x 4 Channel 4 Ohm Bridged: 1200 Watts x 2 Channel Digital Voltage Display on Amp Microphone input and PA microphone included Adjustable Low Pass Filter: 50Hz - 250Hz Adjustable High Pass Filter: 50Hz - 250Hz Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue) Rustproof Aluminum heat sink with silver hairline finish Stainless steel end panels are rustproof All screws and mounting hardware are stainless steel and rustproof Bottom panel is aluminum and rustproof 4 Gauge power and ground terminals 10 Gauge speaker wire terminals All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers All channels on the amplifier are bridgeable High-Speed MOSFET Power Supply Under Voltage Protection at 10V Over Voltage Protection at 16V Tertiary Supplies Circuitry Studio-Grade Bipolar Output Stage Transistors Fully Adjustable 12dB / Octave Crossover with Differential Circuitry Full IC-Controlled Protection Circuitry Fully Adjustable 12dB Bass Equalizer Adjustable Input Level Control Mute and Delay Soft Start System 2CH/4CH Input Mode Switch RCA Line Output 8 Volt Preamp Circuitry Status Mode LED Indicator Minimum THD at Rated Power: < 0.05% S / N Ratio: >90dB Frequency Response: 10Hz - 50KHz Damping Factor: >85 @ 100Hz 40 Amp x 2 ATC Fuse Product Dimensions: 14.72" x 6.69" x 2"