Ardex Feather Finish, 10lb Bag

Use ARDEX Feather Finish for flash-patching, skim-coating and to fill in ridges, gouges, depressions and seams on virtually any type of subfloor. Benefits of the Ardex Feather Finish Bag Self-drying finishing underlayment Creates a smooth surface for laying floor coverings on various substrates Formulated from a mix of Portland cement and hydraulic cements Boasts remarkable bonding strength Simple mixing and application process Requires water for mixing Achieves a true featheredge result Offers excellent coverage – up to 300 sq. ft. per bag* Resistant to mold and mildew Enables floor covering installation in as fast as 15 minutes Intended for indoor use only How to Use  Mixing Ratio: For every 10 lb. (4.5 kg) bag of Ardex Feather Finish, you'll need to mix in 2 1/2 quarts (2.4 L) of water. This is the recommended water-to-powder ratio. Smaller Batches: If you're working with smaller batches, you can adjust the mixing ratio. Use 2 parts of the powder to 1 part of water by volume for these cases. Coverage: The product's coverage varies based on the thickness of application: At a thickness of 1/4", you can expect coverage of about 16.7 sq. ft. per bag (1.5 sq. m at 6 mm). If applied at 1/8" thickness, coverage will be approximately 33.3 sq. ft. per bag (3.09 sq. m at 3 mm). For a skim coat application, each bag can cover an area of 100-300 sq. ft. (9.2-27.8 sq. m). However, please note that the actual coverage might differ depending on the texture of the surface you are smoothing.