Ardex FLEXBONE Heat UH 900 In-Floor Heating & Uncoupling Membrane

Ardex FLEXBONE Heat UH 900 In-Floor Heating & Uncoupling Membrane FLEXBONE HEAT Membrane is a 3-in-1 floor heating, uncoupling, and waterproofing membrane designed with floor heating cables for a uniformly heated tile or stone floor. The unique crossbones design pattern provides an easy template for laying floor heating cables, creating fewer touch points between the cable and the membrane for more efficient heating. The FLEXBONE floor heating cable system can only work with wood, laminate vinyl tile, or carpet flooring when using K 60 ARDITEX Rapid Setting Latex Smoothing and Leveling Compound. ​​​​​​​​​​ Features 1/4″ (6 mm) Mat – 39″ wide x 41′ long (1 m wide x 12.5 m long) roll Coverage of 134.5 sq. ft. (12.5 sq. m) per roll Unique crossbones design allows for pre-filling of the membrane in just one pass or mortar or approved self-leveling underlayment to more securely encase heat cables The heating cable must be spaced so that at least two crossbones patterns are between the cables (approx. 3.88” / 9.8 cm) It can also be installed in a "comfort" setup with at least 3 crossbones patterns between cables It can be used as a waterproofing membrane in bathrooms and other wet areas It can be used as an uncoupling membrane to prevent grout joint and tile damage from substrate movements Must use SK-175 Waterproofing Seam Tape on seams between adjacent mats Ideal for use with large format tile and stone installations Minimal roll memory – rolls out flat every time! Single-Source, Complete System Solution 10-Year system warranty