Ford Bronco (2021+)/F-150 (2018+) Amplifier Integration Interface AmpPRO (B&O A2B Factory Amplified Systems)

Product Highlights Features 6Ch Pre-Outs: The PAC AmpPRO AP4-FD31 provides a 6-channel pre-amp output for use with aftermarket amplifiers. Using the factory digital A2B audio data in conjunction with data-bus CAN messages, the AP4-FD31 delivers a variable 5V RMS pre-amp output with fading, balance, equalization, and level control capabilities. Toslink Output: The AP4-FD31 can provide a variable 2-channel fiber optic digital audio output (toslink). Toslink fiber-optical cable sold separately. Non-Fading Level Control Knob: Channels 5-6 (Sub) of the AP4-FD31 are non-fading outputs. The output level of channels 5-6 can be controlled using the supplied level control knob. The level control knob includes a 16' cable which plugs into the interface module and should be mounted in an accessible location at the front of the vehicle. Data Controlled Remote Turn-On: A data controlled remote amplifier turn on wire is also provided by the PAC AmpPRO AP4-FD31. The remote turn-on is rated at 2A of current. If more current is needed an external relay must be used. Retained Factory Audio Features: The PAC AmpPRO AP4-FD31 also retains all audio from other vehicle features such as factory Navigation Prompts, Bluetooth, Sync, and Warning Chimes. Minimum & Chime Volume: If the minimum volume of your factory radio is too loud once the AP4-FD31 is installed, you can manually set the level of the minimum volume using either the programming button on the side of the interface or the factory SWC (Steering Wheel Controls) in conjunction with the supplied level control knob. You can also use AmpPRO PC app. You can also adjust the chime volume level. AmpPRO PC App: Using the AmpPRO PC App (for Windows PC only) allows you to configure user interface options such as Minimum Volume Level, Chime Volume Level, and a 3-Band EQ from your Windows computer or laptop. The app can also be used to update product firmware. Minimum & Chime Volume Level: From the app you can set the minimum volume level of the factory radio, as well as the chime volume level. 3-Band EQ: Enables the 3-band EQ (Bass-Mid-Treble) with frequency and Q-factory adjustment. The Bass Frequency can be set to 60, 80, 100, or 120Hz; while the Bass Q-Factor can be set to 0.5, 1.0, 1.5, or 2.0. The Mid Frequency can be set to 500, 1k, 1.5k, or 2.5k; while the Mid Q-Factor can be set to 0.75, 1.0, 1.25, or 1.5. The Treble Frequency can be set to 7.5k, 10k, 12.5k, or 15k; while the Treble Q-Factory can be set to 0.75 or 1.25. Firmware: The AmpPRO app will also allow you to update the interface with new firmware as it becomes available. Note: These AmpPRO PC App settings can be adjusted with the module installed in the vehicle or on the bench. However, it is recommended to make the adjustments with the module installed, and the factory radio on so that the changes can be heard. Dip Switches: Switch 1: ON switches the interface into 2-channel mode. All outputs will be non-fading and all chimes are sent to channels 1 & 2 and the Toslink optical output. Switch 2: ON lowers the RCA output voltage to 4V. Set the dip switch 2 OFF to keep the RCA output voltage at 5V. Switch 3: Not used. Switch 4: This switch gets set to ON if installing the interface in a Mach-E series vehicle, and OFF for all other models. Description The PAC Amplifier Integration Interface AmpPRO for 2018+ Ford B&O A2B Factory Amplified Systems is a game changer for car audio upgrades. This advanced interface lets you easily add an aftermarket amplifier to your 2018+ Ford B&O A2B factory amplified system. The plug-and-play design makes installation easy, while the AmpPRO's programmable features allow the audio system to be customized to your preference. This interface retains your vehicle's original features and programs, letting you maintain access to SYNC, active noise cancellation, and Active Park Assist. With this interface, your audio system will maintain clear and balanced sound output throughout your vehicle. NOTE: The factory amplifier must be unplugged or removed when installing AP4-FD31. The included harness provides connections for adding an aftermarket amplifier to the factory-installed speakers. What's In The Box Amplifier integration module 20" Main harness (AP4FD31HARV3) with inline 3A mini fuse 8" APHFDO3 V1 T-harness 8" APHFD22 V1 T-harness Remote level control with connected 16' cable Install Manual Vehicle Fitment Guide Year(s) Make Model Trim Level 2021-2023 FORD BRONCO ALL TRIM LEVELS 2021 FORD BRONCO SPORT ALL TRIM LEVELS 2021 FORD ECO SPORT ALL TRIM LEVELS 2019-2022 FORD EDGE ALL TRIM LEVELS 2021-2022 FORD ESCAPE ALL TRIM LEVELS 2018-2020 FORD EXPEDITION ALL TRIM LEVELS 2020-2023 FORD EXPLORER ALL TRIM LEVELS 2018-2023 FORD F-150 ALL TRIM LEVELS 2020-2023 FORD F-250 ALL TRIM LEVELS 2020-2023 FORD F-350 ALL TRIM LEVELS 2020 FORD F-450 ALL TRIM LEVELS 2022 FORD LIGHTNING ALL TRIM LEVELS 2022 FORD MAVERICK ALL TRIM LEVELS 2021 FORD MUSTANG MACH E ALL TRIM LEVELS 2020-2023 FORD RANGER ALL TRIM LEVELS   Vehicle must be equipped with a factory B&O system to be compatible.Factory amplifier must be removed from vehicle when installing this interface.     Warranty Information We have a 30-day easy return policy for all purchases. We provide a shipping label for defective products upon your return request at no cost. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs. Stinger products are warrantied against defects in materials One (1) Year from purchase date. Stinger will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released. Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser. Note: Products purchased from unauthorized dealers are not covered under warranty. Warranty Limitations Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.