AMBROSIA PPS-CF Filament

Our Recommended Value] Extruder Temperature 300-350 Degrees Celsius

Heated Bed 90-110 Degrees Celsius

70C] Soluble Support Materials Technical Specifications for PPS-CF Filament: Physical Properties Test Methodology Values Density ISO1183 1.3-1.31 g/cm^3 Melt Flow Rate (250C/2.16KG) ISO 1133 3-6 g/10min Mechanical Properties Test Methodology Values Tensile Strength ISO 527 100-110 Mpa Elongation at break ISO 527 1-3% Flexural Modulus ISO 527 5500-6000 Mpa Flexural Strength ISO 178 170-180 Mpa Impact Strength ISO 180 25-30 KJ/m^2 Thermal Dynamic Properties Test Methodology Values HDT@ 0.455 MPa (66 psi) ISO 75 245C Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.