Waterdrop Replacement for Amana Clean N Clear WF401 Refrigerator Water Filter

Model WD-WF401 Temperature 38-100 °F / 0.6-38 °C Filter capacity 350 gallons (1325 liters) / 6 months Flow rate 0.5 gpm (1.9 lpm) Pressure 20-100 psi (140-689 kPa) Reduces Chlorine, bad taste and odor, cysts, rust, corrosion, sediment, and turbidity. The Waterdrop WD-WF401 is compatible with following model numbers: Amana, Maytag Filter Models: 12527304, WF401, WF30, WF40, WF401P, WF401S, WF401T, 12319801, 12388401, 12388403, 12388404, 12388405, 12388406, 12388407, 12388409, 12388410, 12527301, 12527302, 12527303, 12527307, 12527308, 12527309, 12589203, 12589206, 12527504, 67003634, R0130021, R0130022 Kenmore 46-9014, 9014, 9014P, 469014, 0469014000, 46-9904, 9904, 9904P, 469904, 0469904000 Refrigerator Models: 59650392001, ARS2364AB, ARS2364AC, ARS2364AW, ARS2365AB, ARS2365AC, ARS2365AW, ARS2366AB, ARS2366AC, ARS2366AW, ARS2367AB, ARS2367AC, ARS2367AS, ARS2367AW, ARS2664AB, ARS2664AC, ARS2664AW, ARS2665AB, ARS2665AC, ARS2665AW, ARS2666AB, ARS2666AC, ARS2666AW, ARS2667AB, ARS2667AC, ARS2667AS, ARS2667AW, ARS9167AB, ARS9167AC, ARS9167AS, ARS9167AW, ARS9168AB, ARS9168AC, ARS9168AS, ARS9168AW, ARS9169AS, DRS2362AC, DRS2362AW, DRS2662AC, DRS2662AW, SBD21VE, SBD21VL, SBD21VPE, SBD21VPSE, SBD21VW, SBDE21VPE, SBDE21VPSE, SPD26VL, SPD26VW, SQD26VW, SRD21VE, SRD21VL, SRD21VW, SRD23VE, SRD23VL, SRD23VPE, SRD23VPSE, SRD23VW, SRD26VE, SRD26VL, SRD26VPE, SRD26VPSE, SRD26VW, SXD23VE, SXD23VL, SXD23VW, SXD26VE, SXD26VL, SXD26VW, SZD23VE, SZD23VL, SZD23VW, SZD26VE, SZD26VL, SZD26VW Other Brands: Tier1 RWF1090 Aqua Fresh WF292 Best Choice Water Filters BCF92 Gold Series 108401 **The above brands do not source or sponsor the water filter. The manufacturers' names and model numbers have been used for reference purposes only. Do I need to remove the filter prior to descaling equipment? Yes, remove filter prior to descaling and inspect for integrity if needed replace with a new filter. Why are there black specks in the water or why does my water taste funny? Water filters are made from the purest carbon blocks. When the filter ships it bounces around and nocks carbon granules loose from the block. These little carbon granules are called fines. All of the quality filters in the market place require a preliminary flushing to remove the carbon fines Some systems may need to be flushed more than once. This is especially true if you have scale or lime water. If you go on vacation and do not use your filtered water for several days, flush the systems again to remove any stagnant water. If I do not change my filter every 3 months, can this damage the system? Yes, you must replace the filter every 3 months or sooner if water flow is reduced or if there is heavy sediment/rust present. Filters left in longer will fatigue, degrading filter performance. Meets NSF standard filtration performance and manufacturing standards. Adopts high-precision natural activated carbon granules to achieve purification performance. Works exactly like the original filter but at a lower price. Having a top-quality product has always been our approach to water purification.