
$30.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Textile Foil Application Settings Temperature Pressure Dwell Time Stay under 305°F Medium to Firm 8–15 seconds Important Temperature Note: Foil itself does not require heat to transfer. It can transfer cold to packaging tape because the tape is naturally tacky. However, the foil adhesive requires heat and time to become tacky and activate properly. Always consult your adhesive manufacturer for the recommended curing settings. Excessive heat can damage the foil color and affect release performance, so avoid using temperatures higher than necessary. Application Process 1. Screen Print the Adhesive Print your design using a foil adhesive. Recommended Setup: Mesh Count: 60–110 mesh (24–43 cm) Tip: Ensure your screen has proper tension Tip: A thicker-than-normal EOM stencil improves adhesive coverage Tip: Thoroughly mix adhesive before printing to soften it Tip: Shear the adhesive through the screen rather than pushing 2. Suggested Printing Methods Either of the following methods works well: Print → Flash → Print → Smoothing Screen or Two Print Strokes → Smoothing Screen 3. Position the Foil Place the textile foil color side up over the printed adhesive area. 4. Heat Press Apply heat using the recommended settings above. 5. Remove the Foil Lightly rub the foil with a soft cloth, then peel it away. Warm peel or cold peel both work Important Note This is a general transfer process. Always test foil performance with your specific materials, adhesives, and production conditions to determine the best settings for your facility.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2025
$30.00