AM7212/66

The JBL AM7212/66 high power, lightweight loudspeaker system provides excellent coverage for a wide range of applications. From the Manufacturer High Power 12-inch 2-Way Loudspeaker with 60° x 60° Rotatable Horn The AM7212/64 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2262H 300 mm (12 in) low frequency driver and 2432H high-frequency 38mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.  Features 60° x 60° Coverage 2262H Differential Drive® Low- Frequency Driver 2432H High-Frequency Compression Driver Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion Rotatable waveguide for vertical or horizontal orientation Bi-Amp/Passive Switchable Bi-amp and Passive Mode FIR Tuning Set Delivers Optimized Frequency & Phase Response, Coverage Consistency, and Sound Quality Available in Black, White and WRC/WRX finishes Specifications Frequency Range (-10dB): 36 Hz - 20 kHz Frequency Response (±3 dB): 42 Hz - 20 kHz Coverage: /64: 60° x 40°/66: 60° x 60°/95: 90° x 50°/00: 100° x 100°/26: 120° x 60° LF Driver: 1 x JBL 2262H 300 mm (12 in) Differential Drive® driver with 75 mm (3 in) dual voice coil HF Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil System Type: 12" Two - Way, High Power, Full - Range Dimensions (H x W x D): 711 x 369 x 458 mm (28 x 14.5 x 18 in) Net Weight (each): 23.1 kg (51 lb) Crossover Modes: Bi-amp/Passive switchable Passive Crossover Frequency: 1.8 kHz Transducer Power Rating (AES): LF: 1000 W (4000 W peak), 2 hr700 W (2800 W peak), 100 hrs HF: 100 W (400 W peak), 2 hrs System Power Rating: Passive mode: 600 W (2400 W peak), 100 hrs Maximum SPL (1m): Bi-amp mode: LF: 126 dB-SPL cont avg (132 dB peak)HF: 134 dB-SPL cont avg (140 dB peak) Passive mode:123 dB-SPL cont avg (129 dB peak) System Sensitivity (1w @ 1m): Passive mode: 95 dB SPL Nominal Impedance: 8 ohms System Power Rating: Passive mode: 600 W (2400 W peak), 100 hrs (IEC rated) Nominal LF Driver Impedance: 8 ohms Nominal HF Driver Impedance: 8 ohms Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware Environmental: Mil-Std 810; IP-x3 per IEC529.