AM5212/64

The JBL AM5212/64 medium power, lightweight, full-range loudspeaker system provides excellent coverage for auditoriums, dance clubs, sports or entertainment venues and more. From the Manufacturer The AM5212/64 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features 60° x 40° Coverage 262H-1 Differential Drive® Low-Frequency Driver 2408H-1 High-Frequency Compression Driver Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion Rotatable waveguide for vertical or horizontal orientation Bi-Amp/Passive Switchable Bi-amp and Passive Mode FIR Tuning Set Delivers Optimized Frequency & Phase Response, Coverage Consistency, and Sound Quality Available in Black, White and WRC/WRX weather resistant finishes Applications: Performing Arts Facilities Theatrical Sound Design Auditoriums Worship Facilities Live Clubs Dance Clubs Sports Facilities Themed Entertainment Venues Specifications Frequency Range (-10dB) 37 Hz – 20 kHz Frequency Response (±3 dB) 43 Hz – 18 kHz Coverage Pattern /64: 60° x 40°/66: 60° x 60°/95: 90° x 50°/00: 100° x 100°/26: 120° x 60° Crossover Modes Bi-amp/Passive switchable Passive Crossover Frequency 1.5 kHz Transducer Power Rating (AES) LF: 400 W (1600 W peak), 2 hrs300 W (1200 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs System Power Rating Passive mode: 300 W (1200 W peak), 100 hrs Maximum SPL (1m) Bi-amp mode: LF: 122 dB HF: 131 dB System Sensitivity (1w @ 1m) Passive mode: 96 dB SPL LF Driver 1 x JBL 262H-1 300 mm (12 in ) driver with 50.8 mm (2 in) dual voice coil Nominal Impedance 8 ohms Sensitivity (1W @ 1m, within operational band) 97 dB SPL HF Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil Sensitivity 113 dB SPL Waveguide PT-H126HF-1 Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware Finish Black DuraFlex™ finish. White available upon request. Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. Environmental Mil-Std 810; IP-x3 per IEC529 Dimensions (H x W x D in vertical orientation) 713 x 371 x 458 mm(28.06 x 14.6 x 18.1 in) Net Weight (each) 20.2 kg (45 lb) Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 System Power Rating Passive mode: 300 W (1200 W peak), 100 hrs (IEC rated) Nominal LF Driver Impedance 8 ohms Nominal HF Driver Impedance 8 ohms