Alvarez AD60CE-12-BLK Artist Dreadnought 12-string Guitar, Spruce Top, Mah b/s, Cutaway, Electronics, Black

Our Artist Series Dreadnoughts are crafted to achieve outstanding levels of fit, finish, and tonal ability. They are powerful, articulate and voiced to get the best from the Dreadnought body mass through our FS6, forward-shifted, scalloped bracing system. Sonically, they have a broad projection with clear, sonorous bass frequencies and lively trebles. The AD60ce 12-String Dreadnought is a powerful, bold and open guitar constructed from all-Mahogany laminates and A+ solid, North American Sitka spruce top. It has a flawless, thin gloss finish on the top, which exudes a lustrous shine, complemented by a semi-gloss sheen on the back and sides. These features help the soundbox vibrate and respond intuitively to your playing. This impressive 12-string has all the chime and chorus you would expect and it’s an ideal guitar for sonic discovery. This cutaway model allows for easy access up the neck and is fitted with the LR Baggs StagePro Bronze. The StagePro Bronze is a small-footprint side-mounted EQ incorporating the renowned LR Baggs Element under-saddle pickup. This is a low-profile unit with a large backlit tuner, volume, bass and treble controls and phase. The battery box is built into the end pin jack compartment for easy access with a simple push to open and change batteries. CASE/GIG BAG: Not Included. More About Artist Series Alvarez Artist Series represents our commitment to quality and care. Our goal is to create an instant bond between you and your guitar through meticulous design in bracing, voicing and overall construction. Every component—from our bi-level bridge to our solid bridge plates and neck blocks—is carefully considered to deliver the best response possible from solid-top construction. Artist Series guitars are responsive with impressive projection and balance that make them both rewarding and inspiring to play. With a huge selection of body shapes and wood configurations, Artist Series has a guitar for everyone. For a more focused, woody tone, choose a Mahogany top. For a broader, more open projection, choose Sitka. For a warm response to a lighter, melodic touch, choose Cedar. Our Approach to the Build All of our solid tops are selected by our team and graded independently of our suppliers. If it isn’t worthy, it isn’t used. Our laminated backs and sides are uniquely constructed with Mahogany as our middle layer, and our inner and outer layers are always matched. Artist guitars strike the right balance between strength and vibration, crafting a voice to both inspire and give players “tools in the tone.” Alongside this approach to development lies our respect for sourcing, preparation and nurturing the wood we use to make our guitars. No matter how considered design may be, it can only be as good as the wood we use to realize them. Our all-solid wood tops, backs and sides, as well as the mahogany used for our necks, go through a curing process developed over years to create stability, strength and tonal benefits. Depending on the wood and its use, this process takes many months or even years for some of our models. After months-long seasoning, we perform an extra drying stage in thermo-kilns to further enhance wood stability and improve resonance. We call this process ATR—Advanced Tonal Response. ATR™ is a form of torrefaction—oxygen controlled, vacuum curing at special temperatures to remove more moisture and volatiles such as saps and sugars from the wood. ATR™ makes our wood more stable when exposed to adverse dry or humid climates. While we can’t stop the effects of dryness or moisture saturation that can damage guitars, ATR™ goes a long way in helping our guitars become more resilient. Guitars will move or change according to the environment they are in and are more likely to move within the first two years from their production. A guitar usually becomes drier as it ages; this is one of the reasons why players often like the sound of an older guitar. ATR™ advances the natural, post-build drying process so the wood behaves as if it were more mature, stable, and resonant from the first day it is used. The effects of ATR™ are also audible in the instrument. The biggest difference is the clarity and separation between notes and the overall response of the guitar. As the top is drier, it’s also quicker, more resonant, more open, even louder. New guitars can sometimes take time to reach this state as the wood dries over the years. ATR accelerates this effect to deliver a more sophisticated and complex voicing from day one. Our caring approach to development comes from one unwavering goal: To deliver the best guitars in the market at every price point—instruments of a truly remarkable value that offer an unparalleled player experience. Specs General Top Wood: Solid A+ Sitka Spruce Back and Sides Wood: African Mahogany Top Color: Black/Gloss Back & Sides Color: Black/Semi Gloss Headstock Facia: Techwood Bridge Pins: PPS Synthetic Bone Shape: Dreadnought Neck: African Mahogany Pick Up/EQ: LR Baggs StagePro Bronze Bracing: FST2 Bridge: Bi-Level Indian Laurel Inlays: MOP & Acrylic Fingerboard: Indian Laurel Nut and Saddle: Bone Tuner: Chrome Closed Gears Strings: D'Addario XTAPB1047-12 Neck Meets Body: 14th fret Number of Frets: 21 Dimensions: Overall Length: 1082 mm Body Width: 395 mm Body Depth at Heel: 100 mm Body Depth at Base: 122 mm Scale Length: 648 mm 25 1/2 inches Nut Width: 48 mm 1 8/9 inches