Alpha EZ Click Tile Leveling System - Linear Bases

Alpha EZ Click Leveling System - Linear Base 200 Piece Box Introducing the EZ Click Tile Leveling Systems. The EZ Click's patent-pending leveling cap perfectly levels adjacent tiles with zero effort. Features Available in 1/32" (white), 3/32" (yellow), 1/8" (red), and 5/32" (black) bases Designed for both floor and wall tiling Instant screw ejection leveling system No tools are required - simply hand tighten until adjacent tiles are level Spacer Bases fit below tiles and fasten to the caps Proprietary scratch prevention edge Compatible with many older-generation systems The cap can be used more than 500 times (compared to others, which may only be 8 to 10 times) Built-in spacer calibration Color-coded base screws for easy size/type identification Made in Italy Caps sold separately Technical Data Supports tile thickness: 1/8" to 25/32" (3mm to 20mm) Minimum joint size: 1/32" (1mm) 200 bases per box How to use STEP 1: Place spacer bases under the tile once the thin set has been applied STEP 2: Apply the cap to the base. Lock the cap onto the base by twisting the yellow knob. STEP 3: Once the cap is locked to the base, turn the black part of the cap until the adjacent tiles are level; no need to over-tighten STEP 4: After the thin-set has cured, break off caps and bases with a mallet or your foot. It's important to break the caps loose by hitting them in the direction of the top of the spacer base (in line with the grout joint). STEP 5: Remove the broken piece of the bases from the caps by unlocking the cap from the base spindle using the yellow knob.