Alpha Tools ESC-150 6" Electric Wet/Dry Stone Cutter

Alpha Tools ESC-150 6" Electric Stone Cutter Alpha introduces a new electric stone cutter called the ESC-150, which is equipped with a powerful motor capable of cutting 1-1/4" (3cm) stone slabs in one pass. It is capable of miter cutting of 1-1/4" (3cm) materials with ease so that any stone fabricator can use it when miter cuts are required, without the time-consuming setup. The flexibility of the hose helps reduce operator fatigue and improves the operation. The Alpha ESC-150 has a built-in dust gate, making it dustless when connected to a HEPA vacuum. It can utilize a variety of consumables, including the Alpha Katana 6" for porcelain panels and slabs, Hot-Rod 4" for 1/4" steel rods, and 1/8" fiberglass rods. A Libero 5" blade is recommended for marble applications since most marble slabs are 3/4" (2cm) thick or less. Features Powerful motor for use on granite, quartz surfaces, marble, limestone, concrete, and sintered/porcelain slabs Capable of miter cuts 1-1/4" (3 cm) material with ease Kink-free water hose for easy maneuverability and reducing operator fatigue Great for sink-hole cutting, groove cutting/rodding Comes with a built-in dust gate for dustless cutting when connected to a HEPA vacuum Blades sold separately What's Included? Alpha Tools ESC-150 6" Electric Stone Cutter Dust Cover Ground Fault Circuit Interrupter Easy On-Easy Off Sleeve Water Hose (15ft/4.5m) Water quick coupler with shut-off valve Hex wrench Additional Hardware Operator's Manual Alpha ESC-150 6" Stone Cutter Specifications Power 11.2 amps (1,200 W) Voltage 110V/220V No Load Speed 10,000 RPM Arbor 7/8 in Blade Capacity 6 in Max Cutting Depth 2" (50.88 mm) Weight 11.30 lbs.