AirTag Waterproof Case TPU PC Rugged Protective

Why the TPU-and-PC Waterproof AirTag Case Is Essential for Serious Protection The toughest holders combine two materials: a hard shell that resists crushing and a soft bumper that absorbs impact. This waterproof AirTag case does exactly that, pairing a rigid PC core with a shock-absorbing TPU layer to armor your Apple AirTag against water, dust, drops, and crushing forces at once. Clip it to a harness, a pack, or a collar D-ring and it delivers dual-material, do-it-all protection for the most adventurous pets and the owners who refuse to lose a tracker. Welcome to the Gorilla Family. Overview and What You Get You receive one waterproof AirTag case built from a hard PC frame and a soft TPU bumper, with a sealing closure and an attachment ring or loop for harnesses, packs, and collar D-rings. The AirTag sits fully sealed and cushioned inside. Material — Dual-Layer TPU Over PC This case uses two materials the way premium rugged phone cases do. The inner frame is polycarbonate (PC) — the rigid, crush-resistant plastic used in safety gear — which holds the structure firm under pressure. Wrapped around it is TPU (thermoplastic polyurethane), a flexible rubbery polymer that absorbs shock, grips wet surfaces, and forms the water-tight seal. Together they mean a drop is soaked up by the TPU while the PC keeps the case from being crushed, and the sealed TPU edges keep water out. It is the best-of-both-worlds construction for maximum all-round protection. How It Fits Your AirTag The interior is molded to the Apple AirTag's 31.9 mm disc, so the tracker seats fully enclosed with no rattle behind the sealed edges. The design keeps the speaker area functional so you can still ping and hear the AirTag from the Find My app, and both TPU and PC are radio-transparent so signal is never blocked. Pet and Gear Safety Clip this case to a dog harness, a hiking pack, a leash bag, a pet carrier, or a fixed-buckle dog collar's D-ring for heavy-duty protection. As a rugged sealed case, keep it on gear, harnesses, or dog collars rather than loose against a cat's throat; for cat collars, choose a soft threaded breakaway holder so the collar can release safely. Waterproofing and Durability The sealed TPU edges keep rain, mud, dust, snow, and splashes away from the AirTag's electronics, so the tracker keeps reporting through wet, rough adventures. Rinse it under the tap after a muddy or salty outing and dry before reuse. The PC core resists crushing while the TPU bumper absorbs the drops — a combination that outlasts single-material holders. Which AirTag It Fits — Compatibility Made for the Apple AirTag (2021) only. It does NOT fit the Samsung Galaxy SmartTag or SmartTag2, Tile, Chipolo, or any other tracker. The Apple AirTag is not included. TPU and PC are radio-transparent, so Bluetooth, Ultra Wideband Precision Finding, and the Find My network all work at full range. Step-by-Step Setup Guide Open the case and seat your AirTag dome-up in the PC frame. Close the TPU-sealed cover until the edges seat fully. Clip the ring or loop to your harness, pack, or collar D-ring. Tug to confirm it is secure. Ping the AirTag from Find My to verify the signal and chime. Real-World Use Cases The Adventure Dog: dual-material armor for trails, water, and rocks. The Harness Setup: crush and drop protection on a working harness. The Muddy Season: sealed against grit and slush. The Rough Player: TPU bumper soaks up the knocks. The Traveler: a tough holder clipped to a carrier or pack. Feature-to-Benefit Mapping Feature Benefit PC hard core Resists crushing and holds structure TPU shock bumper Absorbs drops and grips wet gear Sealed edges Keeps rain, mud, and dust off the AirTag Attachment ring/loop Clips to harnesses, packs, and collars Radio-transparent materials Full signal and audible chime Care and Cleaning Rinse the case after muddy or salty outings and dry before reuse. To change the AirTag battery, open the case, twist the stainless cap, swap the CR2032, and reseal. Frequently Asked Questions Which tracker does this fit? The Apple AirTag (2021) only. Not Samsung SmartTag, Tile, or Chipolo. The AirTag is not included. Why two materials? The PC core resists crushing while the TPU bumper absorbs impact and seals out water — together they protect better than either alone. Can I clip it to a harness or collar? Yes. The ring or loop attaches to harnesses, packs, carriers, and collar D-rings. Is it good for a cat collar? It is a rugged sealed case for gear and dog collars; for cat collars, use a soft breakaway holder. Will it block the signal or chime? No. Both materials are radio-transparent and the speaker area stays functional. Can I change the battery? Yes — open the case, twist the cap, swap the CR2032, and reseal. Why Gorilla Cases Gorilla Cases exists because the things you track are the things you love, and the holder should never be the weak link. We test hard, describe honestly, and back every order with free 30-day returns. Questions before you buy? Call our team at 978-797-0223 and we will help you choose the toughest setup. Keep your best friend on the map — shop now at gorillacasestore.com.