AirLounger Wholesale

The Inflatable Crazy Creek! 2 in 1 Chair & Sleep Pad! Available NOW! Multi Use Modes: Chair Mode  Chair with Single Layer of Cushion on Bottom Chair with Double Layer Cushion on the Bottom (2nd Layer Inflates Separately from Main Chair) Extended Chair- 3rd panel covers bottom of your legs for added comfort Pillow Mode 3rd panel turns into a pillow for any laying down outside you may do! Perfect for the beach, lake, river- anywhere you'd want to lay and soak in the rays! Sleeper Mode Unfolds to 50 inches long for Sleep Pad -Extra Durable Ripstop Nylon & TPU welded construction -Carbon reinforced fiberglass support stays -3-Dimensional Weld with Inner Baffle Design – Extra Durable & More Comfortable -Ultra Compact: Rolls to 3 Inch Diameter (or less) & Just 32 Ounces! -Dual Purpose- use as a sleeping pad too!  Works as a 3/4 length Sleep Pad -Airs up in 5 or less breaths! -C-Zero Water Repellent Coating -Simple 2-way Air Flow Valve - Rubber + Nylon hinge patches for added durability -1 Year Limited Warranty To inflate (both valves): 1. Make sure valve is pushed in fully before inflating (valve will click into place once sealed). 2. Pull up on the valve so the inner part only is open. 3. Blow into valve (typically five breaths) to inflate fully. 4. Close valve by pushing lid down completely. To deflate: 1. Pull the entire valve open until the air comes out. 2. Using your arm, smooth the entire chair to push out the air. To roll: 1. After all air is out of the chair, fold in half at the hinge point. 2. Hold chair sideways with the valve open, facing down and away from you. Begin rolling the chair as tight as possible towards the valve. 3. Once rolled, secure with the two closure straps and buckles and close the valve fully until you feel a click. 4. Leave out the side buckle/strap for easy carry handle.