Air Compressor Hookup Kit: 15-Piece Brass Fittings, Swivel Connector, Water Separator and Regulator

Everything to hook an air tool up to your compressor in one order: brass quick-connect fittings, a swivel connector for the tool, a water separator for dry air and an analog regulator to set the pressure. All four LE LEMATEC parts use 1/4" NPT threads. Bought separately, these parts cost $71.44. What is in the kit 15-Piece Brass Quick-Connect Fitting Kit: 2 quick-connect couplers, 3 male plugs, 3 female plugs, 5 hex connectors and 2 rolls of PTFE tape in a storage case, solid brass, rated to 300 PSI ($20.47 on its own) AI-112 Swivel Air Connector: turns 360 degrees at the tool so the hose does not kink or pull on your wrist, with male adapter and Teflon tape ($10.99 on its own) AI303-C1 Water Separator: 2 to 150 PSI, 1 micron filter, one-way valve, push-button drain, with adapter and Teflon tape ($17.99 on its own) AR-01 Analog Air Regulator: 0 to 150 PSI gauge and adjustment knob to set the air pressure at the tool ($21.99 on its own) Before you buy Thread size: 1/4" NPT on every part Quick-connects fit the standard 1/4 inch plugs and couplers that come with most air tools and compressor hoses Water separator: 2 to 150 PSI Shipping: Free shipping on every US order. Ships from Amazon fulfilment, so parts may arrive in separate boxes. QuestionsWill these parts fit my compressor and air tools? Yes, if they use 1/4 inch NPT threads, the most common size on US home and shop compressors and air tools. Every part in this kit is 1/4" NPT. If your compressor outlet is 3/8 inch, add a 3/8 to 1/4 inch adapter. In what order do the parts go? A typical setup is compressor, hose with quick-connect fittings, water separator, regulator, then the swivel right at the tool inlet. The water separator goes before the regulator so the regulator only sees dry air. Do I need thread tape? Yes. Wrap the male threads with PTFE (Teflon) tape before you tighten them. Tape comes with the fittings kit, the swivel and the water separator.