AiM K8 PDM CAN-Configurable Keypad (8-Button)

AiM K8 PDM CAN-Configurable Keypad (8-Button) PDM button inserts are sold separately here This is a CAN-programmable 8-button panel compatible with AiM PDM systems (PDM08 and PDM32). This keypad comes pre-configured for use with AiM protocols and is ready to be programmed through AiM's RaceStudio software. The buttons measure 15mm size and the overall panel size is 127.4 x 71.4 x 24 mm (5.0" x 2.8" x 0.9"). AiM K8 PDM CAN-Configurable Keypad (8-Button) Details Manufacturer: AiM Sports Manufacturer part number: X08KPK8 Weight: 150g (5.2 oz.) Connector: AiM 5-pin Binder 712 Supply voltage: 12-24Vdc, Nominal 8-32Vdc Standy current: <50mA Communications BUS: RS485, CANopen J1939 Operating temperature: -40ºC to 70ºC Thermal shock: -40ºC to 85ºC Salt spray standard: ASTMB117 Chemical resistance: dirt, engine cleaner, isopropyl alcohol, multi-purpose cleaner, muriatic acid Waterproof rating: IP67 Each button's function and backlight can be programmed using AiM Race Studio software. Each button can be set up as momentary, toggle, or multi-position. Once a button is programmed, install the button insert (sold separately) corresponding to its function. The rear connector is a motorsport-grade AiM 5-pin Binder 712 female connector pinned-out for AiM CAN+, GND, Vb, AiM CAN-, and Vbext. AiM K8 Configurable Keypad Common Features Reconfigurable buttons Programmable RGB LEDs LED backlit rings and icons Momentary, toggle, and multi-status Two blinking mode Wide range of inserts CAN-Bus system compatible Vertical or horizontal mount Status restore option