Aerosol Super Glue Accelerator Spray — Dries Super Glue in Seconds

Starbond Super Glue Aerosol Accelerator is used to significantly speed up the drying time of cyanoacrylate super glues.  Also known as a CA glue “activator”, this accelerant is solvent-based, and can be applied before and/or after the glue application.  Commonly paired with slower-drying, thicker viscosity adhesives and black CA glue, Starbond Super Glue Accelerator is also helpful when priming uneven surfaces.   It’s ideal for material combinations that are harder to bond and for colder, drier environments that delay curing time. Our aerosol cans deliver a finely compressed mist and are perfect for the infrequent user, as the acetone in the product does not escape the bottle organically.  Also available as a pump spray, this accelerator cures super glue in seconds – no more waiting! Professional Tips: When using higher volumes of super glue to fill gaps, bonding times may increase – use of Starbond Super Glue Accelerator is highly recommended. Starbond Super Glue Accelerator can also be used to enhance joint strength, when used to cure excess adhesive that results from joints being pressed together. Uniquely formulated to dry slightly slower than other similar products on the market, Starbond Super Glue Accelerator prevents “hazing” or whitening that may occur when super glues dry too fast. Warning: This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer.  For more information, please visit: www.P65Warnings.ca.gov.