Adjustable Self-Closing Gate Hinge Set

Steel Hinge set for fence gates Additional Details: Zinc Plated Steel Powder Coated Finish Self-closing hinge technology, designed to help with sagging gates Hinges Sold in Pairs (2 Hinges) Self-drilling screws included (drills through metal, wood or vinyl) Hinges will open to approximately 180 degrees Steps for hinge installation: Place horizontal adjustment on gate only Screw hinges onto gate – hinge side with the two nuts (best to pre-drill holes for the screws) Screw hinges onto post – spring loaded side of the hinge (best to pre-drill holes for the screws) Horizontal adjustment – use wrench to adjust nuts for proper horizontal position Fully tighten both nuts Insert adjusting pin and rotate towards gate until the desired amount of tension is achieved Insert locking pin Rotate adjusting pin towards post until the locking pin is against the hinge and remove the adjusting pin Note: If desired you can take out the locking pin to make the hinges so they are not self-closing.