📏40CM Adjustable Stainless Steel Tile Hole Positioning Ruler📐

Measure · Position · Mark · Cut Stop Guessing Where to Drill the Hole Measure pipe, outlet and fixture positions, lock the setting and transfer the layout directly to your tile, board or wall panel. 360° Multi-Angle Adjustment 4× Built-In Hole Templates 40 40cm Main Ruler 430 Stainless Steel Fewer Measurement Mistakes Measure Once. Transfer the Position. Measuring pipe and fixture positions with several separate tools can lead to repeated calculations, misplaced marks and wasted tiles. This adjustable ruler keeps the distance, angle and hole position together in one locked setup. Traditional Measuring Adjustable Locator × Multiple separate measurements ✓ Position several points together × Recalculate distance and angle ✓ Lock and transfer the layout × Search for a separate circle template ✓ Built-in hole-marking templates × Greater chance of misplaced cuts ✓ Check the position before cutting Adjustable Cross-Ruler Structure Position From Multiple Directions The horizontal and vertical ruler sections slide and rotate around the central locking point. Adjust the distance and angle, then tighten the black hand knob to hold the selected layout during transfer. ↕ Vertical Adjustment Move the main ruler up or down along its extended center slot. ↔ Horizontal Adjustment Slide the cross ruler left or right to match the required distance. 360° Angle Adjustment Rotate the ruler to copy straight, angled or offset positions. Multiple Built-In Templates Mark Common Hole Sizes Directly Select the appropriate built-in circular template, place the ruler on the workpiece and trace the cutting line with a marker. 55mm Semicircle Guide 45mm Large Circle 40mm Medium Circle 25mm Small Circle Important: The built-in openings are marking templates. Confirm the required finished opening size and cutting clearance before drilling or cutting. Pipe & Electrical Box Layout More Than a Circle Template In addition to pipe-hole marking, the ruler includes reference markings that assist with common electrical-box and multi-point layout work. Use it wherever position, spacing and edge distance must be transferred. ✓ Pipe & Valve Positioning Transfer pipe centers and distances to tiles or wall panels. ✓ Electrical Box Layout Assist with outlet-box and cable-opening measurements. ✓ Multiple Hole Layouts Keep several related hole positions aligned during marking. ✓ Edge & Corner Measuring Copy offsets from walls, floors, corners and existing surfaces. Simple Four-Step Process Measure. Lock. Mark. Cut. Copy the required position from the installation area and transfer it directly to the tile, board or panel before cutting. 01 Measure the Position Place the ruler against the pipe, fixture or installation point. 02 Adjust & Lock Slide and rotate the ruler, then tighten the black hand knob. 03 Transfer & Mark Move the locked ruler to the tile and trace the required opening. 04 Drill or Cut Check the measurements and cut along the completed marking. Made for Repeated Layout Work Hardened 430 Stainless Steel The metal ruler body provides a rigid layout surface, while the laser-marked scale stays clear and easy to read during routine tile, plumbing, electrical and renovation work. 430 Stainless-Steel Body Metal construction for repeated measuring and marking work. ✦ Laser-Marked Scale Clear measurement markings for easier positioning. ✋ Hand-Tightened Knob The large black knob is easy to grip and tighten by hand. Check the Measurements Product Specifications Review the dimensions and built-in template sizes before ordering. Product Type Adjustable Multi-Hole Positioning Ruler Material Hardened 430 Stainless Steel Main Ruler Length 40cm / 15.75in Cross Ruler Length Approx. 30cm / 11.81in overall Usable Cross Scale Approx. 28cm / 11.02in Main Ruler Width 7.8cm / 3.07in Cross Ruler Width 5.5cm / 2.17in Template Sizes 55mm semicircle; 45mm, 40mm and 25mm circles Adjustment Horizontal, vertical and 360° rotational positioning Locking System Hand-tightened black star knob Suitable Materials Tile, wall panels, boards and similar layout surfaces Please note: Measurements are approximate. Always verify the final hole position, drilling clearance and material compatibility before cutting.