Activator Solution Packets for Silver Cleaning

Blitz Activator Solution Packets for Silver Cleaning These Blitz Silver Cleaning Packets can only be used with the Blitz Ultrasonic Silver Cleaning Kit item # 20762. Don't use boiling water. This is how you clean silver or silver jewelry with an ultrasonic jewelry cleaner. Mix 10:1 ratio. Works quickest with warm tap water (or distilled water) in the ultrasonic cleaner and turn the machine "on" for 3 minutes WITHOUT putting anything else in the tank. This will help to de-gas the solution. Be sure that the solution amount does not exceed the max line in the tank. Then put the silver cleaning plate (Blitz stock #20762) in the ultrasonic cleaner's basket WITH your silver jewelry on top of the silver cleaning plate. Turn the machine on for at least 3 minutes. The process of turning the machine on with silver jewelry in it can be repeated several times with very dirty or heavily tarnished silver and silver jewelry. If the water/solution becomes dirty, you must rinse the tank and repeat the process, as dirty solution does not clean properly. Four (4) Activator Solution Packets for Ultrasonic Silver Cleaning Kit - REFILL Non-Toxic and Environmentally Friendly Made in the USA Blitz Stock # J681PPF WARNING: Soft and porous stones may not be suitable for an ultrasonic cleaner. Consult with your jeweler.