Accustic Arts Power II

ACCUSTIC ARTS® POWER II: Audiophile integrated stereo power amplifier with included headphones amplifier POWER II highlights Audiophile integrated stereo power amplifier with high output performance 12 selected Bipolar output transistors of highest quality Encapsulated 550 VA toroidal core transformer of premium quality for high output reserves; separate windings for preamp section and for power amp section Integrated, switchable headphones amplifier of premium quality Very good smoothing thanks to more than 80,000 µF power supply capacity High damping factor for high output reserves Integrated protective circuit switches ascents off when clipping, HF oscillations, too high temperature or too high DC offset occurs Constant low operating temperature due to generously dimensioned heat sink 2 x balanced high level inputs (XLR) 3 x unbalanced high level inputs (RCA/Chinch), can be configured as high-level input or “SURROUND-BYPASS” 1 x unbalanced output (RCA/Chinch), can be configured as high-level input or “SURROUND-BYPASS” 1 x unbalanced pre-output (RCA/Chinch), configurable as RECORD output or preamp output Separate level adjustment for each input Premium quality, gold-plated speaker terminals Premium quality, long-term stable relays Highly accurate microprocessor-controlled volume control Full metal housing for optimum shielding Front panel made of brushed aluminum; turning knobs/push buttons made of massive and chromed brass ACCUSTIC ARTS® remote control RC II ACCUSTIC ARTS® POWER II is “Handmade in Germany” Specifications Inputs: 2 x balanced high level inputs (XLR) 3 x unbalanced high level inputs (RCA/Chinch) 1 x unbalanced inputs (RCA/Chinch) as high level input or SURROUND-BYPASS (RCA) Headphones output: 1 x metal female jack 6.3 mm; >25 Ω Outputs: 1 x unbalanced pre-output (RCA); 47 Ω Signal difference left/right: < 0.4 dB (from 0 dB to -40 dB) Input resistance: balanced: 2 x 50 kΩ unbalanced: 50 kΩ Total transformer power: max. 550 VA (watts) Power supply capacity: more than 80,000 µF Rated power output (at THD+N = 1.0 %): 2 x 315 watts at 2 Ω 2 x 235 watts at 4 Ω 2 x 180 watts at 8 Ω Rise time / fall time: 4.6 µs with 4 Ω load Signal to noise ratio: -97 dBA (ref. 6.325 V) – A weighted Distortion (THD+N): < 0,015 Damping factor: > 710 Power consumption: approx. 61 watts (without load) Dimensions (H x W x D): 145 x 482 x 440 mm / 5.7 x 19 x 17.3 inches Weight: approx. 23.0 kg / 50.7 lbs