ABS-MD -GF - Two Step Process Filament

A very long-fiber ABS-GF for your Two Step Process needs! Shipping note: despite what the Shop App may tell you, filament has an $8 minimum shipping charge Quick Info: Fills: 15% GF, 10% Mineral Filler for .1% shrinkage in 30c ambient! Quantity: 1KG Material: ABS-MD-GF  Diameter: 1.75mm Print Temperatures: 250-310C (Recommended 280c+) Bed Temperatures: 70-100C Heated Chamber Recommended - 50-80C, but will print easily far lower due to low shrinkage Comes on a high-temperature spool - will survive drying at recommended drying temps Spool weight: 222g This is a special, extremely low warp blend, it's been printed open air!  Includes a resealable filament bag Enjoy the durability of ABS with the extra stiffness and strength of glass fibers with ultra low warp! Special Formula out of the RacoonWorks, this ABS is sure to delight with its easy-to-print nature, high flow, and beautiful color! Due to the fibers in this filament, we recommend using a .6mm nozzle, with .5mm being the absolute smallest size. We recommend drying this filament before printing with it. Special Notes: Don't sand this material without proper ventilation and PPE. Fillers may irritate lungs when made airborne.  Appearance notes: The material is made with ultra-long-aspect ratio glass fibers, resulting in a very textured appearance on the spool. This is a byproduct of how the fibers interact during the filament extrusion process (and was specifically tuned for best layer bonding) & isn't detrimental to the final part produced.  TDS