ABS 49 Cu Ft Pharmacy Solid Door Refrigerator PH-ABT-NSF-49S

American BioTech Supply 49 Cu Ft Pharmacy Solid Door Refrigerator PH-ABT-NSF-49S These premier upright refrigerators are designed in accordance with the NSF/ANSI 456 Standard for Vaccine Storage. Refrigerators protect pharmaceuticals at optimal temperatures, preventing waste and allowing for peak delivery. These solid door refrigerators utilize microprocessor controllers and feature temperature alarms, remote alarm contacts, LED interior lighting, and probe access ports.   American Biotech Supply Vaccine Storage Refrigerators utilize HFC-free refrigerant for environmental health and energy efficiency. The acceptable temperature ranges for vaccine storage are 36°F to 46°F (or 2°C and 8°C) in the refrigerator and -58°F and 5°F (or -50°C and -15°C) in freezers. Description: OPERATIONAL ENVIRONMENT INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH STORAGE CAPACITY 49 CU. FT. GROSS VOLUME DOOR TWO SWING SOLID DOORS, SELF-CLOSING, NON-REVERSIBLE, MAGNETIC SEALED GASKETS, KEYED LOCKS SHELVES FOURTEEN SHELVES (TWELVE ADJUSTABLE/TWO FIXED) WITH GUARD RAIL ON BACK MOUNTING 3 1/2" SWIVEL CASTERS (TWO LOCKING) INTERIOR LIGHTING SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM AIRFLOW MANAGEMENT FORCED AIR TECHNOLOGY, PATENT PENDING EXTERNAL PROBE ACCESS REAR WALL PORT (3/4") DIA. INSULATION CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM EXTERIOR MATERIALS WHITE POWDER COATED STEEL ACCESS CONTROL PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE GENERAL WARRANTY TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION COMPRESSOR WARRANTY FIVE (5) YEARS COMPRESSOR WARRANTY PRODUCT WEIGHT 402 LBS SHIPPING WEIGHT 452 LBS RATED AMPERAGE 4.5 AMPS POWER PLUG/POWER CORD NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL FACILITY ELECTRICAL REQUIREMENT 110-120V AC: 15 A (MINIMUM) AGENCY LISTING AND CERTIFICATION CERTIFIED WITH THE TEMPERATURE PERFORMANCE REQUIREMENTS AS DEFINED IN THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE FOR ALL TESTING SCENARIOS. UL, C-UL, ETL, C-ETL LISTED AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY. INCLUDED ACCESSORIES TEMPERATURE MONITOR DEVICE (TMD) COMPLIES WITH THE CURRENT CDC GUIDELINES, WITH 3 YEARS CERTIFICATION OF CALIBRATION, “BUFFERED” PROBE IN THE PRODUCT SIMULATED SOLUTION, MIN/MAX MEMORY, FIELD INSTALLABLE, AND VISUAL & AUDIBLE TEMP ALARM PHARMACY REFRIGERATOR/FREEZER TOOLKIT AND TEMPERATURE LOGS Performance UNIFORMITY¹ (CABINET AIR) +/- 1.0°C STABILITY² (CABINET AIR) +/- 0.9°C MAXIMUM TEMPERATURE VARIATION (CABINET AIR) +/-1.2°C TEMPERATURE RISE AFTER 8 SEC DOOR OPENINGS TEMPERATURE DID NOT EXCEED 6.0°C AT ANY PROBE FOR ALL REQUIRED NSF/ANSI 456 TESTING PROTOCOLSᶟ RECOVERY AFTER 3 MIN DOOR OPENING ALL PROBES RECOVER TO UNDER 8°C WITHIN 6.5 MIN. ENERGY CONSUMPTION 1.45 KWH/DAY⁴ AVERAGE HEAT REJECTION 3.15 KWH/DAY (448 BTU/H)⁴ NOISE PRESSURE LEVEL (DBA) 48 OR LESS INSTALLED PULL DOWN TIME TO 4°C NOMINAL OPERATING TEMP 45 MIN Temp Controller: CONTROLLER TECHNOLOGY PARAMETRIC, MICROPROCESSOR, LED DISPLAY WITH 0.1°C RESOLUTION DISPLAY TECHNOLOGY NSF/ANSI 456 STANDARD FOR VACCINE STORAGE COMPLIANT DIGITAL TEMPERATURE DISPLAY AND ALARM MODULE WITH BATTERY BACK-UP, F/C SWITCHABLE. TEMPERATURE SETPOINT RANGE 1°C TO 10°C (CONTROLLER SETTINGS MUST REMAIN UNALTERED TO ENSURE THERMAL PERFORMANCE COMPLIANT WITH NSF/ANSI 456 STANDARD FOR VACCINE STORAGE REQUIREMENTS) DISPLAY PROBE CALIBRATED, STAINLESS STEEL EXTERNAL ALARM CONNECTION STATE SWITCHING REMOTE ALARM CONTACTS ALARMS VISUAL AND AUDIBLE INDICATORS HIGH / LOW TEMPERATURE, COMPLIANT WITH ALARM REQUIREMENTS DEFINED IN THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE SIMULATOR BALLAST GLASS BEAD THERMAL MEDIA   Product Documents Tech Specs We recommend requesting a quote for a more accurate shipping estimate. There are 4 shipping options available *Shipping Options* LTL – Dock to dock only (End user has a raised dock and does not require any assistance with unloading the unit) LTL + Liftgate – Carrier will deliver the unit by lowering to the ground only (End user will be responsible for moving the equipment inside) LTL + Liftgate & Threshold – Carrier will deliver the unit by lowering to the ground and taking the unit through the nearest entry access (End user will be responsible for moving to desired location and unpackaging) LTL + Inside Delivery – Includes delivery appointment, liftgate, two man delivery, pallet jack, four wheel dolly, placement in room of choice, unpacking, debris removal and installation of casters and/or door handles (if applicable) (End user is responsible for plugging in and any temperature setting applications) This product ships directly from ABS (American Biotech Supply), ensuring fast delivery, proper handling, and factory quality. When you purchase ABS (American Biotech Supply), you’re backed by a trusted name in laboratory equipment—known for precision, reliability, and dependable support. Shop with confidence knowing your order is fulfilled directly by the manufacturer. Product Brochure