Aardwolf Hand Vacuum Cup

Aardwolf Hand Vacuum CupThe Aardwolf Hand Vacuum Cup Lifter is a vacuum lifter for handling smooth, non-porous material. It is rated at 265 lb (120 kg), a 8.7" (220 mm) pad. Built from aluminum with rust-resistant parts. Unit weight 3.2 lb (1.5 kg). Features 265 lb (120 kg) working load limit 8.7" (220 mm) vacuum cup Weighs 3.2 lb (1.5 kg) Built from Aluminum with rust-resistant parts Specifications Property Detail Brand Aardwolf Working Load Limit 265 lb (120 kg) Cup Diameter 8.7" (220 mm) Net Weight 3.2 lb (1.5 kg) Gross Weight 4.4 lb (2.0 kg) Material Aluminum with rust-resistant parts Gauge Integrated vacuum gauge Vacuum Generation Manual pull-pump; three pumps produce high vacuum Surface Type Flat, smooth non-porous surfaces only Packaging Dimensions 10.6" x 10.6" x 4.3" (270 x 270 x 110 mm) Included Protective carrying case Country of Origin Vietnam How to Use & Handling Inspect the vacuum pad seal for cuts, grit, or compression set before each shift. Charge or connect the pump power supply and confirm it primes. Seat the pad flat on clean, sound, non-porous material with no chips or seams under the seal. Draw vacuum and wait for the gauge to reach the safe zone before taking any load. Lift slowly and keep the load low; never stand or pass under a suspended load. Never exceed the rated 265 lb (120 kg). Set the material down fully, then release vacuum and vent the pad. Videos Vacuum Cup, best on the market - Aardwolf | Aardwolf