A3DP Filament Drying Cabinet

Commercial Filament Drying Cabinet by Advanced 3D Printing Ultra-Low Humidity Drying and Storage Cabinet for Hydroscopic 3D printer filaments. Maintains less than 1% Relative Humidity.  Humidity control range: 1-20%RH, <1%RH, <5%RH, <10%RH SMT EMS IPC/JEDEC Ultra Low Humidity Dry Cabinet Electronic Humidity Control Cabinets (Auto Dry Boxes) Specially Designed for 3D Printer Filaments Wet filament can cause many 3D printing defects and failures, such as nozzle clogging, rough or grainy surface textures, nozzle bursts, weak parts, and more. Standard filament dryers are great for PLA, PETG, and other low temperature materials, but are limited in size and cannot dry higher temperature materials or highly hydroscopic materials such as PA (nylon), PETG, PC, PVA, PEEK, PC-ABS and other moisture-absorbing filaments. They are also not able to maintain humidity levels low enough to avoid re-absorption of moisture.  The A3DP Drying Cabinet utilizes dual drying cores to quickly and sustainably reach low humidity levels within the cabinet. Moisture isn't merely suspended in the air, but evacuated from the chamber so it can't be reabsorbed into the filament. Specifications Volume 128 Liters External size H89* W40* D41cm Internal size H81.5* W39.5* D40cm Accessories Upward/Downward adjustable shelf*3, lock key Humidity Control Range <20%RH, the lowest can reach to 1%RH. Desiccating Capability Open the door for 30 seconds, the humidity can drop below 10%RH within 5-10 minutes, the lowest can reach to 1%RH. Humidity Control Design Intelligent microcomputer control, touch control panel operation, LCD panel display. Cabinet body design Cabinet body uses 1mm strengthen steel plate and 3mm tempered glass door. Power Source AC110V+10V 50/60HZ or customized AC220V+10V 50/60HZ or other customized power requirement.   Unboxing Video by Rob Luciani from Advanced 3D Printing: