8 X 6 RMP™ - CONSOLE + DOOR + DASH

*NOTICE 4/08/2025 THERE IS A CURRENT LEAD TIME OF APPROXIMATELY 1-2 WEEKS FOR THIS PRODUCT TO BE SHIPPED 8 X 6 RMP™ - CONSOLE + DOOR + DASH For fastening an RMP™ to a solid surface, purchase our RMP Fastening Kit™ - Self Drilling Screws + Nylon Spacers. Insert the self drilling screws through the preferred perimeter holes of the RMP™. Next, insert the self drilling screws through the nylon spacers. Fasten the self drilling screws into the preferred location of the solid surface. If preferred, a pilot hole may be drilled into solid surface in advance. For fastening an RMP™ using adhesive backed fasteners to a vehicle panel, utility case lid, safe door or metal, plastic and glass surfaces, purchase our Adhesive Backed - 3M™ Dual Lock™ Fastener Kit. To adhere 3M™ Dual Lock™ to an RMP™: Clean RMP™ surface with an alcohol wipe and let completely dry. Apply included 3M™ Primer 94 to the RMP™ surface that the 3M™ Dual Lock™ will be adhered. Remove backing from the 3M™ Dual Lock™ strip and press firmly into place on the RMP™. Press further with a rolling pin or place heavy weight onto the newly 3M™ Dual Lock™ backed RMP™ to compress and ensure full contact. For fastening an RMP™ using adhesive backed fasteners to a vehicle panel, utility case lid, safe door or metal, plastic and glass surfaces, purchase our Adhesive Backed - 3M™ Dual Lock™ Fastener Kit. To adhere 3M™ Dual Lock™ to an RMP™: Clean RMP™ surface with an alcohol wipe and let completely dry. Apply included 3M™ Primer 94 to the RMP™ surface that the 3M™ Dual Lock™ will be adhered. Remove backing from the 3M™ Dual Lock™ strip and press firmly into place on the RMP™. Press further with a rolling pin or place heavy weight onto the newly 3M™ Dual Lock™ backed RMP™ to compress and ensure full contact. To adhere 3M™ Dual Lock™ to a solid surface: Clean the solid surface with an alcohol wipe and let completely dry. After adhering the 3M™ Dual Lock™ onto the RMP™, line up the corresponding 3M™ Dual Lock™ strip and secure in place. Remove backing from the 3M™ Dual Lock™ while still secured to the RMP™. Line up the RMP™ on the solid surface you desire to attach to your RMP™ and press firmly in place. Remove the 3M™ Dual Lock™ backed RMP™ carefully to avoid lifting the 3M™ Dual Lock™ that is adhered to your solid surface. Press further with a rolling pin or place heavy weight onto your newly 3M™ Dual Lock™ lined solid surface to compress and ensure full contact. PRO TIP For stronger adhesion, apply heat from a hair dryer to warm up the surface and the adhesive, enabling the adhesive to liquefy enough to seep into the surface for a better bond. For easier handling or application, it is recommended to cut the 3M™ Dual Lock™ into 1" squares or 1" x 2" strips. Package Contents: QTY 1 - 8 X 6 RMP™ Optional - QTY 1 - Adhesive Backed - 3M™ Dual Lock™ Fastener Kit or QTY 1 - RMP Fastening Kit™ - Self Drilling Screws + Nylon Spacers Compatibility: Any solid surface with dimensions equal to or greater than 8" wide X 6" tall Specifications: WIDTH 8" | 203.2mm HEIGHT 6" | 152.4mm THICKNESS 0.188" | 4.77mm WEIGHT Self Drilling Screws + Nylon Spacers: 6.70 ounces | 191.5 grams QTY 1 - 3M™ Dual Lock™ Fastener Kit: 6.35 ounces | 181.0 grams MATERIAL Injection Molded Glass Filled Nylon BRAND Grey Man Tactical™ SKU Self Drilling Screws + Nylon Spacers: 000286 QTY 1 - 3M™ Dual Lock™ Fastener Kit: 000287 UPC Self Drilling Screws + Nylon Spacers: 00850022713002 QTY 1 - 3M™ Dual Lock™ Fastener Kit: 00850022713019