TetraPond Debris Handling Pump for Outdoor Fish Ponds

DESCRIPTION The Tetra&reg Pond Debris-Handling Pump provides clog-free performance for pond filters, waterfalls or streams. It features a pre-filter cage that prevents leaves, sticks and other large debris from entering the unit, and protects fish from the pump's impeller. This powerful, energy-efficient and UL listed pump is engineered for continuous operation and can handle debris up to ¼ inch in diameter — allowing you to clean your pond, not your pump!This pump is engineered to circulate large volumes of pond water without clogging, which allows the pump to operate for long periods of time without any maintenance. Water, dirt and debris are drawn through the quarter-inch holes in the large pre-filter cage that surrounds the pump. Pond water with dirt and debris are pumped to an external filter for removal or directly to a waterfall or stream.Since 1951, Tetra has developed the world's most comprehensive body of fish food knowledge, and fishkeeping enthusiasts have looked to the brand for products and solutions that add ease and beauty to their home. Whether you're an experienced hobbyist or just starting out, Tetra has everything you need — from a large variety of quality fish food and innovative equipment to test kits and decor.Features: Continuous-Operation Pond Pump: For Powering Pond Waterfalls And Streams With Rugged Debris-Handling Impeller That Can Pass Debris Up To 1/4 Inch In Diameter.Clog-Free Performance: Large Basket Minimizes Blockage And Maintenance.Energy Efficient: Unidirectional Impeller And Motor.Wear-Resistant: Motor Has Anti-Corrosive Ceramic Shaft For Longer Life.Three Sizes: For Ponds Up To 1,500 Gallons, Up To 3,000 Gallons And Up To 4,000 Gallons.Material(s): PlasticColor: GreenDimensions: 13.15in x 10.5in x 8.63inProduct Weight: 14.62lbCapacity: Up to 3000 GallonsDirections: FLOW PERFORMANCEDetermine how high your waterfall will be from the pond surface. The higher the top of the waterfall is from the pond surface; the less flow will result.See charts below for the approximate waterfall effect the DHP pumps will create at various pumping heights.TUBINGTo maximize flow rates use 1 ½ in. ID tubing. Fits ¼ in. ID tubing also.Use TetraPond Kink-free corrugated tubing for best results.USE AS A FILTER PUMPTetra&reg Pond Debris Handling Pumps work well with the Tetra&reg Pond Bio-Active Pressure filters.This filter provides excellent mechanical and biological filtration for ponds up to 3000 gallons. Place pump in bottom of the pond. Pump to an external filter Tetra Pond BP Series Bio-Active Pressure FilterTIP:Pond Circulation:Choose a pump that will circulate 100% of the pond volume in one to two hours. More circulation will result in better pond conditions.Pumping at 3 feet creates a waterfall effect without any filter restrictionPumping at 3 feet through a Tetra&reg Pond pressure filter reduces flow by about 45%.Caution: NOTE: Be aware that filters reduce the flow to waterfalls and streams.