8" RAZR Synthetic Ultra w/ Pro Curved Blades

Attach to your Brushlesss Drill (1/2 chuck) or Powerhead Output Shaft (22mm). Available in 6" and 8" hole sizes. Safety Notice  Brushless drills create a large amount of torque, that when combined with your RAZR Auger will always require two hand operation. Failiure to use two hands while using a cordless drill can cause bodily harm. Ensure your cordless drill is in "Drill" mode and set to lowest speed setting. Properly attach the side handle to the drill according to manufacturers instructions. Tighten the drill chuck, and take caution to make sure the above two items are setup prperly. Always ensure proper drill settings, make sure all adapters are tight, and keep loose articles of clothing, hands and feet clear of operating area. Drill Requirements To achieve maximum performance from your RAZR Synthetic Ultra, we suggest you pair your auger with a drill that meets the following mininum features / specs: 18V+  Brushless Drill 4-5 Amp Hour or Higher Battery 1/2” Chuck Type Side Stabilizer / Handle Minimum Torque Rating of 84 Nm / 750 in. lbs.+ No Load RPM Range of 0-550 RPM on Speed Setting 1