8" SDS-Max Tapered Extension

8" SDS-Max Tapered Extension Vendor: ITM About This Tool: Upgrade your SDS-Max rotary hammer with this heavy-duty 8" Tapered Extension. Crafted from special alloy steel and Tungsten Carbide, this tool is built to endure continuous hammering. Perfect for professional use, it requires a pilot drill bit and extension for optimal performance. Specifications: Size: 8" SDS-Max Extension Part #: 720MAX008 Instructions: Ensure the tapers are clean before use. Insert the pilot drill into the drive extension. Secure the drive extension into the core bit. Begin drilling until 3/8” deep, then remove the pilot drill. Continue drilling until the core bit is filled, typically 3” deep. Break down drilled material with a chisel if needed. Repeat until desired hole depth is reached. About This Tool: Important: Always use a pilot drill bit to prevent damage to the extension. Failure to do so may cause breakage, especially between the two slots. Please note that such breaks may not be covered under warranty. Type: Core Drills - Carbide Tags: Holemakers, HVAC, Carbide Core Drills, ITM, 8", SDS-Max, Extension Shafts, Carbide Hammer Popular uses for an 8" SDS-Max Tapered Extension include: - Heavy-duty construction projects - HVAC installations and repairs - Concrete drilling for structural work - Renovation and remodeling in commercial settings This size is commonly used in industries such as construction, HVAC, and general contracting due to its versatility and durability.