2-1/2" Carbide Core Drill

2-1/2" Carbide Core Drill Vendor: ITM About this Heavy Duty Rotary Hammer Core Bit: Unleash the power of the 2-1/2" Carbide Core Drill by ITM with your SDS-Max electric rotary hammer machine. Crafted from special alloy steel and Tungsten Carbide, this drill bit is built to withstand continuous hammering. Don't forget to grab a pilot drill bit and extension to complete your drilling arsenal. Specifications: Size: 2-1/2" Core Bit # Teeth: 9 4” OAL / Taper Part # 719CB0065 Instructions: Ensure a clean surface by wiping off oil or lubricant from the extension and core bit. Insert the pilot drill into the drive extension first for a smooth drilling process. Begin drilling until the core bit penetrates 3/8” into the material. Use the ejector key to remove the pilot drill when needed. Continue drilling until the core bit fills with material, typically 3” deep. Break down drilled material inside the bit with a chisel if necessary. Repeat steps to reach your desired hole depth effectively. About Proper Usage: Important: To prevent damage, always use a pilot drill bit with your core bit. Avoid drilling without it as it can cause excessive pressure and potential breakage to the extension. Remember, safety first for a successful drilling experience! Type: Core Drills - Carbide Tags: Holemakers, profession: HVAC, sdscat: Carbide Core Drills, ITM, size: 2-1/2", SDS-M