1-1/2" Carbide Core Drill

1-1/2" Carbide Core Drill Vendor: ITM About This Mighty Drill: Unleash the power of this Heavy Duty Rotary Hammer Core Bit, specially designed for use with SDS-Max electric rotary hammer machines. Crafted from a special alloy steel body and Tungsten Carbide, this drill withstands relentless hammering. Don't forget, a pilot drill bit and extension are required for maximum impact! Key Specifications: Size: 1-1/2" Core Bit # Teeth: 6 4” Overall Length / Taper Part #: 719CB0040 Pro Tips: Clear any oil or lubricant from the extension and the core bit taper before use. Always insert the pilot drill into the drive extension first for smooth operation. Start drilling until the core bit reaches a depth of 3/8”. Use the ejector key to remove the pilot drill easily. Continue drilling until the hole is filled, approximately 3” deep. If needed, break the drilled material inside the core bit with a chisel. Repeat the process until the desired hole depth is achieved. Need to Know: Attention: Avoid core bit drilling without a pilot drill bit to prevent excessive pressure on the taper shank system. This can lead to breakage, especially between the two slots on the extension. Remember, such breaks may not be covered under warranty. Type: Core Drills - Carbide Tags: Holemakers, profession: HVAC, sdscat: Carbide Core Drills, ITM, size: 1-1/2", SDS-Max, brand: ITM, style: