KDD 6.7L Power Stroke Upper Oil Pan with O-Ring Gasket

In stock, ships in about 1-2 days. Tired of chasing oil leaks and redoing the same upper pan job over and over? Do it once and do it right. The KDD 6.7L Power Stroke Upper Oil Pan with O-Ring Gasket is a 100% brand new upper pan, made specifically for Kill Devil Diesel by an OE supplier, and it seals with a real O-ring gasket instead of silicone. A proper gasket seal is one of the most reliable ways to seal an oil pan, and this is the fix that lets you stop worrying about that pan for good. Fits 2011-2019 Ford 6.7L Power Stroke. Not compatible with 2020+ trucks. Why the KDD Upper Oil Pan A real gasket, not silicone. The later factory upper pans rely on silicone to seal the pan to the block, front cover and oil pump. Factory silicone-sealed pans are very problematic and frequently cause repeat leaks, downtime and oil consumption. Even a robot can't get it perfect. Ford lays the silicone bead on the factory pans with a robot on the assembly line, and those pans are still notorious for leaking. Even with today's best RTV and the best technicians, applying silicone by hand will never be as precise as a robot, and failed RTV is miserable and time consuming to clean off. KDD's pan with a gasket makes for a much more consistent seal.   Built for a proper seal and easier service. The KDD pan is made with a gasket groove so it seals the tried and true way, with a real O-ring gasket. That means a better seal, and an easier job the next time it needs maintenance or service. Start fresh after an engine failure. If your engine has had a bearing failure, or any other events that put debris or fuel contamination in the oil, the old pan is a real risk. The 6.7 upper pan is intricate, with a lot of oil passages, and it can be next to impossible to get all of the debris and contamination out after a failure occurs. Whatever's left behind can lead to a repeat failure. Replacing a potentially contaminated factory pan with a brand new KDD pan helps make sure the failure that killed the old engine doesn't take out the new one. A permanent fix, not a patch. Instead of a temporary fix on a pan that was never designed for a gasket, you get a brand new upper pan built for one. That eliminates the risk of contamination from the old pan and gives you a solid gasket seal at the block, front cover and rear cover. Do it once, do it right. Skip the hours of scraping old silicone and trying to clean out the old pan. Doing the job right the first time costs less than doing it two or three times, and it helps eliminate comebacks and warranty headaches, whether you're in a shop or your own driveway. Quality you can count on. Made by an OE supplier from heat-treated A356 aluminum. What's Included KDD 6.7L Power Stroke upper oil pan (brand new) O-ring oil pan gasket Fitment 2011-2019 Ford 6.7L Power Stroke Note: Not compatible with 2020+ 6.7L Power Stroke trucks. 2020+ trucks use a different style pan, front cover and oil pump. Questions? Call us at 252-725-1222. Please note: The oil cooler and oil filter housing are not included. This pan reuses your factory oil cooler, oil filter housing and mounting hardware.