570-913 | CX 2000 Auto Refractometer / Keratometer

CX 2000 Auto Refractometer / Keratometer   Extremely fast operation Auto alignment + auto shot Pupil + cornea Ø measurement Colour touch screen Power motion joystick Eletronic controlled chin rest Central + peripheral k-values The CX 2000 sets a new standard for modern eye diagnostic instruments using the latest electronic technology innovations. Thanks to the electronically controlled movement operation and alignment can be done by using either the power motion joystick and / or touch-screen – all in a fraction of a second. The Rodenstock CX 2000 conveys professionalism and ease of use by providing highly accurate measurements in a remarkably short examination time. Auto-alignment + auto-measurement Operating the CX 2000 couldn’t be easier. Simply align the measurement head towards the patient’s eye and the instrument takes over, handling the fine adjustment and measurement all by itself. Once the first measurement is completed the colour touch-screen displays a prompt to automatically repeat the measurement process on the other eye. Colour touch-screen The 5.7” colour touch-screen is used to monitor operation and display the measurement results. The measurement head can be moved in all directions simply by touching the screen. All commands are inputted via touch-screen. Extremely fast operation The CX 2000 acquires measurement data for both refraction and keratometry remarkably fast in less than three seconds, making the most effective use of your time and maximising cost effectiveness. Central + peripheral k-values The CX 2000 provides keratometer values for the central (ø 3 mm) and peripheral (ø 6 mm) simultaneously within one second. Measurement can be made from the cornea or the back surfaces of a RGP contact lens. Power motion joystick The CX 2000 is equipped with the newest joystick technology available. Five power motion modes ensure precise and silent movement of the head in all directions. You have the choice between coarse or fine movement towards the patient’s eye. SPECIFICATIONS Refractive power measurement Spherical (SPH) .................-25.00 D to +22.00 D (at VD=12.0 mm) Cylindrical (CYL) ...............0 D to ±10.00 D (at VD=12.0 mm) Display unit.......................0.01 D, 0.12 D, 0.25 D Asti. axial angle (AXIS)......0° to 180° Asti. display unit ..............1° Minimum pupil Ø..............2.2 mm Vertex distance.................0 mm, 12.0 mm, 13.5 mm, 14.0 mm, 15.5 mm, 16.0 mm Measurement time............0.2 sec / single eye (data taking time) Corneal measurement Curvature (K1, K2, AVG)...5.00 mm to 11.00 mm Display unit.......................0.01 mm Refractive power (K1, K2, AVG)...................30.68 D to 67.50 D (n=1.3375) Astigmatism (CYL)............0 D to 10 D (n=1.3375) Display unit.......................0.01 D Asti. axial angle (AXIS)......0° to 180° Asti. display unit...............1° Cornea ø .........................3.0 mm / 6.0 mm (at 8.00 mm corneal curvature) Measurement time............0.1 seconds / single eye (data taking time) Pupillary distance measurement Measurement range..........50 to 86 mm Display unit.......................1 mm Corneal and pupillary diameter measurement Measurement range..........1 to 14 mm Display unit.......................0.1 mm Observation range............approx. 15 mm × 9 mm Auto-alignment range Up-down/left-right Directions.........................7 mm Focusing direction.............5 mm Main unit Built-in printer...................Thermal printer Movable part Movement range Front-rear.........................40 mm Left-right..........................88 mm Up-down..........................50 mm Chin rest Movable range..................70 mm Data output type..............RS 232 c Display..............................5.7” TFT Dimensions and electric requirements Dimensions (WxDxH).........300 × 493 × 466 mm Weight.............................approx. 19 kg Input.................................100 to 240 V AC Frequency.........................50 / 60 Hz Power consumption..........130 VA to 150 VA