350-540 SQ. FT. METALLIC EPOXY FLOOR KIT

INSTALLATION INSTRUCTIONS  POTLIFE WARNING: DO NOT LEAVE MIXED EPOXY IN THE BUCKET, EPOXY WILL SET WITHIN 15 MINUTES IF LEFT IN BUCKET.  POUR ON FLOOR IN STRIPES IMMEDIATELY AFTER MIXING FOR LONGEST WORKING TIME +/- 40 MINUTES. 540 Sq. Ft. Metallic Epoxy Floor Kit includes 9 gallons of epoxy for up to 540 square feet of floor ** THE THICKER METALLIC EPOXY IS PLACED, THE BETTER YOUR FLOOR WILL LOOK. YOU CAN INSTALL THIS KIT BETWEEN 350 FT.² TO 540 FT.². THE THINNER THE METALLIC EPOXY IS PLACED, THE MORE CHANCES OF DEFECTS SHOWING THROUGH THE METALLIC EPOXY. Not recommended for exterior use or direct UV exposure. CFS-Low Viscosity Primer coverage is approximately 200 square feet per gallon. CFS-Metallic Epoxy coverage is approximately 60-90 square feet per gallon. Optional 3/4 gallons CFS-High Solids Urethane Top Coat (metallic epoxy  must be sanded with 220 grit screening pad prior to installing urethane) ** IT IS GOOD PRACTICE TO HAVE EITHER DENATURED ALCOHOL OR XYLENE AVAILABLE WHILE INSTALLING THE METALLICS. IF BUBBLES OCCUR FROM VAPOR TRANSMISSION, LIGHTLY MIST EITHER OF THESE SOLVENTS ON TOP WITH A HAND SPRAYER AND THEY WILL POP. KIT INCLUDES: 3 gallons CFS-Low Viscosity Primer (Vapor barrier rated up to 3 pounds per 1000 ft.² of vapor transmission) 3 gallons CFS-Clear Metallic Epoxy with 12 ounces metallic pigment of your choice (#1 color) 3 gallons CFS-Clear Metallic Epoxy with 12 ounces metallic pigment of your choice (#2 color) Optional 3/4 gallons CFS-High Solids Urethane Top Coat (metallic epoxy  must be sanded with 220 grit screening pad prior to installing urethane) We do also have CFS-Floor Restore Wax Concentrate (virtually odorless) which can be used as a protective topcoat that has higher scratch resistance than the epoxy. Simply mop 3-4 coats with a microfiber mop and you are done.  540 Sq. Ft. Metallic Epoxy Floor Kit includes metallic color pigment packs to provide an array of metallic colors. 40+ metallic color pigments to choose from. FULL SIZE METALLIC PIGMENT COLOR CHART Colors are digital representations, and may vary from actual colors. TECHNICAL DATA SHEET: CFS-HIGH SOLIDS URETHANE CFS-CLEAR METALLIC EPOXY CFS-LOW VISCOSITY PRIMER SAFETY DATA SHEET: CFS-HIGH SOLIDS HIGH WEAR URETHANE CFS-CLEAR METALLIC EPOXY CFS-LOW VISCOSITY PRIMER FREE SHIPPING