500 SQ. FT. CTR SERIES MVB EPOXY/POLYASPARTIC FLAKE FLOOR KIT

INSTALLATION INSTRUCTIONS This system is virtually odorless. Designed for contractors. In stock and ready to ship. Unlike the “complete epoxy flake floor kits” available to everyone, this kit is designed for contractor use. You add the pigments for the primer and intermediate coat on site.   500 Sq. Ft. CTR Epoxy Flake Floor Kit includes: 6 gallons (2-3 Gallon Contractor Kits) of CFS-CTR Moisture Vapor Barrier (CLEAR) 18 mil thickness +/-84 sq.ft. per gallon 3 gallons of CFS-CTR Multi Purpose Epoxy + pigment added on site (Intermediate Coat) for up to 500 square feet of floor. 10 mil thickness 65 pounds of blended flakes, available in  1/8″ | 1/4″ | 1/2″ sizes 4 Gallons CFS-2C Polyaspartic: Two component, high gloss, 100% UV stable,  slow set, easy to install, 35-45 minute working time, very low odor.(This coating is California / scaqmd compliant) 13 mil thickness *YOU CAN ADD 1 PINT OF XYLENE PER 2 GALLON KIT OF CFS-2C FOR INCREASED WORKING TIME AND REDUCTION OF ROLLER LAP MARKS (DO NOT SUBSTITUTE ANY OTHER SOLVENT, THERE WILL BE AN ODOR FROM THE SOLVENT) 1 pint  aluminum oxide 380+ decorative flake options to choose from. Please call our office for assistance customizing your own blend. FULL SIZE EPOXY COLOR CHART FULL SIZE DECORATIVE FLAKE BROCHURE Colors are digital representations, and may vary from actual colors. TECHNICAL DATA SHEETS: CFS-CTR SERIES MOISTURE VAPOR BARRIER CFS-CTR SERIES MULTI PURPOSE EPOXY COAT CFS-2C TWO COMPONENT POLYASPARTIC TOPCOAT SAFETY DATA SHEETS: CFS-CTR SERIES MOISTURE VAPOR BARRIER CFS-CTR SERIES MULTI PURPOSE EPOXY COAT CFS-2C TWO COMPONENT POLYASPARTIC TOPCOAT ALUMINUM OXIDE Additional videos of this similar systems being installed: Video 1 Video 2 Video 3 Video 4 FREE SHIPPING