5' EZ Stand Fabric Display | Tension Fabric Banner Stand

A slim, freestanding 5-foot fabric display with a smaller tube diameter and curved corners — a lighter, lower-cost alternative to a full backwall when you only need one clean panel of branding. It assembles in about five minutes with no tools. The aluminum tubes slide together and lock with push-button snaps to form the frame. The pillowcase graphic then pulls over the frame like a cover and zips shut along the bottom, where the zip is hidden from view. Tensioning at that bottom seam is what pulls the stretch fabric taut, so the graphic reads flat and edge-to-edge with no visible hardware. Disassembled, the frame and graphic pack down into a compact carry bag (available separately). Key Features • Five-minute, tool-free assembly: Push-button snap tubes go together by hand. One person, no instructions needed after the first time. • Hidden bottom zip: The zip sits underneath and out of sight, and tensions the fabric as it closes — so the finished panel is smooth, not slack. • Slim tube profile with curved corners: A thinner frame than a standard backwall, which reads as a cleaner silhouette in a small space. • Single or double-sided: Single-sided graphics come backed in black or white fabric. Double-sided prints both faces for open floor positions where people approach from both directions. • Graphics sold separately too: Already own the frame? Order the graphic on its own and keep the hardware. • Washable stretch fabric: Dye-sublimated polyester, machine washable on a cold gentle cycle. Specifications Display dimensions: 60" W x 90" H x 17.5" D — five feet wide and seven and a half feet tall, with a 17.5" footprint at the feet Material: Dye-sublimated stretch polyester over an aluminum tube frame Graphic finishing: Sewn on the top, left and right edges; zipper along the bottom edge, concealed in use Artwork: Print-ready templates are on our trade show display templates page — download before you start designing. Send us the file instead and we will set it up for you. How to choose between the options There are two decisions and one accessory question. One side or two? If the display stands against a wall or at the back of a booth, single-sided is the sensible spend. If people will walk past both faces — an aisle, a concourse, a lobby, a registration area — double-sided earns its price. Black or white back fabric? This only applies to single-sided. It is the color people see from behind. Black disappears into a dark venue and hides scuffs; white reads lighter and brighter in a bright room. Black is the more forgiving choice. Complete display, or graphic only? A graphic-only order is for customers who already own the frame and want a new message. If this is your first one, you need a graphic and hardware option. What's Included Graphic and hardware: (1) Custom dye-sublimated fabric graphic — single-sided with black or white back fabric, or double-sided (1) Aluminum tube frame (2) Feet Graphic only: (1) Custom dye-sublimated fabric graphic — single-sided with black or white back fabric, or double-sided Where a 5-foot display works At 60 inches wide it fits where a booth backwall will not, and at 90 inches tall the graphic sits well above head height so it still reads across a crowded room. It suits tabletop-adjacent positions in a 10x10, registration and check-in desks, hotel and conference corridors, hospital and clinic lobbies, bank and dealership showrooms, career fairs, school events and retail floors. It is also the practical choice when the display has to be carried by one person and travel in a car rather than a crate. Ordering from Stow, Ohio We are a graphics and display company in Stow. Send us a logo or a layout and we will set the artwork up for you, send a proof, and say plainly if something in the file will not hold up stretched across a frame — thin rules, small type and photographs at low resolution are the usual casualties. For customers across Northeast Ohio — Akron, Cleveland, Canton, Kent, Hudson, Youngstown — we can deliver and set it up with you the first time. Outside the region it ships. Hardware is made to order, so allow lead time on a first purchase rather than expecting same-day dispatch. Replacement graphics for a frame you already own are quicker. Frequently Asked Questions How big is the 5 ft EZ Stand? The assembled display measures 60 inches wide, 90 inches tall and 17.5 inches deep at the feet — five feet across and seven and a half feet high. Where do I get the artwork template? On our trade show display templates page. Download it before you design so the artwork is built at the right size with the correct bleed. If you would rather not, send us your logo and layout and we will set it up and send a proof. How long does it actually take to set up? About five minutes. The tubes snap together by hand, the graphic pulls over the assembled frame like a pillowcase, and the bottom zip closes. No tools, no loose fixings. What is the difference between black and white back fabric? On a single-sided display, the back is plain fabric rather than printed. Black tends to recede and hide marks; white looks lighter in a brightly lit room. If the back will be visible and you are unsure, choose black. Can I buy just the graphic? Yes. Three of the options on this page are graphic-only, for customers who already own the frame and want to change the message without repurchasing the hardware. Can the graphic be washed? Yes. Dye-sublimated stretch polyester can be machine washed cold on a gentle cycle. Air dry it fully before fitting it back on the frame. Is a carry bag included? The bag is a separate item. The frame and graphic pack down small enough to carry, but if this display is going to travel regularly the bag is worth adding. Related: Artwork templates · One Choice® 8' fabric pop-up display · One Choice® 10' fabric pop-up display · Trade show displays in Cleveland · Request a quote