4IN Light CAN Input Expander

Great for Maxxecu Mini or Sport systems when you need extra sensor data.  For instance, If we have a late model GSXR 1000 with a sport ecu the fly by wire uses up quite a few analog inputs.  This super compact unit allows you to have those and add up to 4 more analog inputs or on/off switches through your can bus network. Download TCK2ANA datasheet The 4IN Light is a module to transmit on a CAN bus measurements in mV of 4 analog inputs. Each input has a 5V, signal and analog ground to avoid splices on sensor side wiring. A 1k21 pull up resistor is automatic or manual switchable for also allow temperature measurements (NTC or PT1000) without adding components. Also, 1k21 pull down can be internally connected for set input at Vcc/2 and use it as dual digital input. A free appplication windows is available to configure: - CAN speed (auto baudrate functionnality) - Frequency of messages (one message entry) - ID Message - CAN message data fully user configurable - CAN message forwarding on smae bus - Pull Up - Pull Down (new) - mV to physical value elaborations (new) - Frequencies measurement up to 5kHz with TTL signal (new) - Virtual rotary (using Up/Down analog as digital inputs) (new)   Characteristics: - Size:44x18x10mm without cable - Weight: 30g - Cables: arround 18cm cable for each input and CAN (KU AWG24 with DR25 sleeve) - Enclosure:Aluminium - Protection: IP67 (filled with PU resin) - Temp: - 20ºC / +80ºC - ADC: 12bits, from 0 to 5000mV - Message recurrence: 1ms to 1s - Configuration: via PC (Windows) and USB/CAN LAWICEL or PEAK system   Sold without connector