4Bros Safariland QLS Molle Adapter

4BROS Safariland QLS MOLLE Adapter — 2-Row PALS Receiver Mount (6004-22) Add a Safariland QLS Receiver (Model 6004-22) to your plate carrier, chest rig, or MOLLE vest—using only two rows of MOLLE/PALS. Our pre-assembled adapter creates a low-profile, rock-solid, no-cant mount that keeps your holster tight to the chest for confident retention and clean draws. Purpose-built for QLS 6004-22 (receiver plate only) 2-row MOLLE footprint for compact, stable mounting Pre-assembled for quick, simple installation No cant by design (vertical orientation) Tested 100+ lb pull strength* (see note below) Compatible with holsters using the Safariland QLS 19 Fork on the holster side Not for Blackhawk or Blade-Tech systems (see alternative mount below) What’s in the box 1× 4BROS QLS MOLLE Adapter (pre-assembled) Important links Safariland QLS Receiver Model 6004-22 HERE Blackhawk/Blade-Tech MOLLE solution HERE Pull-strength note: Adapter plate strength was validated to over 100 lb of pull; actual failure occurred around ~300 lb (beyond our test rig’s validation range). Field conditions vary—inspect regularly. Law Enforcement & Military Purchasing We support departments with Net 15-day terms (check only). Purchase Orders must come from a department email, and the shipping address must match the department location. Bulk quotes are available—contact us for a formal quote and to initiate the order. Threadlocker Guidance After confirming fit/function, we strongly recommend applying Loctite VC-3 to all screws. Once cured, disassembly can be difficult—verify function first. Terms & Conditions By purchasing, you acknowledge responsibility for correct installation on your gear. 4BROS is not responsible for incorrect installation. Key Specs (At-a-Glance) Interface: Safariland QLS Receiver 6004-22 (pairs with QLS 19 fork) Mounting: 2-row MOLLE/PALS vest, plate carrier, or chest rig Orientation: Vertical only (no cant) Assembly: Pre-assembled adapter + hardware FAQ's What receivers does this adapter support? It’s designed exclusively for the Safariland QLS 6004-22 receiver. It pairs with a QLS 19 fork mounted to your holster. Will this work with Blackhawk or Blade-Tech? No. This adapter is not compatible with Blackhawk or Blade-Tech quick-detach systems. See our Blackhawk/Blade-Tech MOLLE option HERE Does the adapter allow cant/angle adjustment? No. This is a fixed, vertical mount. Cant is not supported. How many MOLLE rows does it use? Exactly two rows of MOLLE/PALS to keep the holster tight to the chest and minimize flex. What gear can I mount it on? Any carrier, vest, or chest rig with standard MOLLE/PALS spacing that provides two vertical rows. Is it pre-assembled? How hard is the install? Yes—pre-assembled for a quick and easy install.  What threadlocker should I use? Use Loctite VC-3 after verifying the function. Once cured, the system is difficult to disassemble. How strong is the adapter? Lab pull testing exceeded 100 lb; failure ~300 lb in our tests. Always inspect your gear and follow departmental policies. Do you offer LE/MIL terms or bulk quotes? Yes—Net 15 (check) with department email + address match, and bulk quotes on request. Contact us to get started.