47-66X = Stainless Steel Pins for Magnetic Tumblers

Magnetic tumbler media. You get 250 gram of Stainless steel pins 5mm long. Two sizes are available: #47-662 = 0.3mm x 5mm pins #47-660 = 0.5mm x 5mm pins Tips on Using Your Magnetic Tumbler * Do not use all the shot provided with the unit at once. There is always a bit of experimentation involved in the first few uses. As a starting point, place approximately 1/4 lb of the stainless steel shot in the plastic container for every 10 rings. * After you have placed the shot in the bowl, fill it with water to between 1/3 and 1/2 full. * Put tumbling soap / burnishing solution in the water. * Put in your jewelry and run the machine for about 40 minutes. * After your first "tumble", you should have an understanding of what you have to do to obtain the finish you require.  * Once you have established the proportions and tumbling times that give you the desired results, you will be able to consistently obtain the same results over and over.