3D - Poxy - High Gloss Montan Wax

3D Poxy is an exceptionally long-lasting sealant wax, containing Montan wax properties that shine and protect the surface for extended periods. It's a unique hybrid of paint sealant and wax, with a carefully designed formula that bonds to painted surfaces for superior protection and a glossy finish that lasts. It works superbly on all colors, particularly darker paints, and offers superior defence against natural elements like bird droppings, acid rain or hard water deposits. Its efficacy comes from Mining Fossilized Montan Wax, making it the most heat-resistant wax presently available: consuming over 15% more heat than even Carnauba Wax, melting at a temperature of 203°F (compared to Carnauba's 187°F).   HOW-TO: IMPORTANT: Always work on a cool, clean surface in the shade. Always shake liquid waxes well before and during use. By Hand Step 1: Using a clean microfiber or foam applicator pad, apply a quarter size drop of product to the face of the applicator pad and using an overlapping circular motion apply and spread over a section of a body panel. The goal is to lay down a thin, uniform layer of product. Repeat this until you have applied a thin, uniform layer of 3D POXY to the entire vehicle. Allow 10 to 20 minutes for the product to fully dry. Step 2: After the 3D POXY has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully removing the wax using a clean, soft microfiber towel. Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels. By Machine Step 1: Using an orbital polisher with a soft foam polishing or finishing pad, apply 4-5 nickel sized drops of 3D POXY to the face of the pad. Set the tool speed dial to a medium speed setting and methodically move the pad over each body panel to lay down a thin, uniform layer of wax. Continue this process until the entire vehicle has a thin, uniform layer of wax. Allow 10 to 20 minutes for the 3D POXY to fully dry. Step 2: After the 3D POXY has dried to a haze, normally around 15 to 20 minutes, remove the wax beginning with the panel where you first applied the wax and then following your path-of-travel, gently and carefully removing the wax using a clean, soft microfiber towel.  Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels.