38" Zeus Tapestry & Bead Loom

Loom Specs: Weaving Width: 35 Weaving Length without Shedding Device: 61" with continuous warping  Weaving Length with Shedding Device: 57" with continuous warping Loom Width: 38" Weight: 14 lbs Regular Shed Size: 3/4"  Extended Shed Size: 1.5" (for extended shed loom option) *Notes: The weaving lengths listed factor in warp waste. You can weave the "without the shedding device" weaving length with the shedding device if you use it and then remove at the very end and finish off the piece without it.  Click here to see this loom's full specs compared to Mirrix's other looms Loom Description: The 38" Zeus Loom is Mirrix's second-largest loom. It was designed to be large enough to accommodate a small rug. It can easily be moved from room to room or driven to a workshop while able to make a weaving at a size usually reserved for large, heavy, immobile floor looms. This loom has double beams on the top and bottom for extra strength. Loom Materials: The top and bottom beams are made of anodized aluminum; the sidebars are made of steel and copper; the wooden clips are made of maple Included: Four coils: 8, 12, 14, 18 dents, shedding device and handle, two wooden clips, warping bar, flat wrench, Allen wrench, warp coil/spring bar and written instructions. Regular or Extended Shed: This loom's shedding device is available with a regular shed size (3/4") or an extended shed (1.5") size. The extended shed option is perfect for rug weaving or for anyone looking for a portable tapestry loom with a large shed for bobbins, shuttles or fingers! Choose "Extended" from the drop-down to select the extended shed option. Please note that you will need to buy or make extended heddles if you choose a loom with an extended shedding device.  Additional Information: What can you weave on this loom? Beads, Fiber, Beads and Fiber Positioning: Upright with two fold-out legs on a table or on The Mirrix Harvey Stand. Shedding Device: Yes. Click here to learn more about the Mirrix shedding device. You can purchase this loom with a shedding device for a regular (3/4") or extended (1.5") shed -See above. If you plan on using the shedding device with this loom, you will want to buy or make heddles or extended heddles. Note: The shedding device doesn’t have to be used for every project. When warping you can choose to put the shedding device on the loom or not to.  Available accessories: Bottom Spring Kits, Shasta Combs, The No Warp-Ends Kit, the Extra Warping Bar Kit, Loom Extenders, The Electric Spencer Treadle, The Mirrix Harvey Stand, Add-On Bottom Beam, Extra Shedding Device  Click here to learn more about which loom accessories you might want to purchase now or in the future.  If you need help deciding which loom is best for your needs, click here to get a personalized loom recommendation. Click here to learn about what you need to get started weaving.