35 Inch Offset Linear Shower Drain with Hair Trap by SereneDrains

35 Inch Offset Outlet Linear Shower Drain with Hair Trap by SereneDrains Net: 35 ⅜" x 2 ¾" (900mm) | Overall: 37.01" x 4 ⅜" | Intake: 17.48 sq. in. | Offset: 2.8" from end Use this linear drain when a center outlet won't work: Joist in the way: When a floor joist sits directly beneath the drain location, building codes and structural requirements can limit where and how it may be cut, notched, or drilled. This offset outlet linear drain positions the connection 2.8" from the drain end instead of centered, helping position the waste-line connection away from the joist, rather than needing to pass directly through where the joist sits. Slab-on-grade construction: Showers built over 4 inches or more of poured concrete present a real challenge when the existing plumbing doesn't line up with a standard center outlet. Relocating drain plumbing in a concrete slab means breaking concrete, extensive demolition, and added labor cost. If your existing rough-in falls within the drain's offset range, you can connect directly to it, potentially avoiding slab-cutting or coring. Existing off-center outlet: Older bathrooms, previous remodels, and existing rough-ins don't always have plumbing centered beneath the shower. This offset outlet linear drain is built to match plumbing that's already positioned off-center, so you can work with the existing waste pipe instead of relocating it, saving time, labor, and remodeling costs. Specifications Net size 35 ⅜" x 2 ¾" (900mm) Overall size 37.01" x 4 ⅜" Intake area 17.48 sq. in. Offset outlet 2.8" from drain end Channel width 2 ¾" (70mm), pre-sloped Material 16-gauge 304 stainless steel, electro-polished, fully welded, leak-tested, corrosion-resistant Finish Brushed Stainless Steel Flow rate 6.3 GPM entrance / 9.5 GPM wall-adjacent Tile compatibility Up to 10mm (14mm lip), sized to ½", 1", 2", 4" modules Waterproofing Hot mop, membrane, sheet, vinyl, all standard methods Connection Standard 2" flange Maintenance No special cleaning required Availability In stock, ships same day Included Stainless channel and grate, rubber gasket, puller key, waterproofing membrane, hair/debris strainer, installation instructions. Grate Styles Ocean Wave, Traditional Square, Broken Lane, Tile Insert Available Sizes Size Net Dimensions Overall Dimensions Intake Area 16" 15 ¾" x 2 ¾" (400mm) 17 ¼" x 4 ⅜" 7.80 sq. in. 24" 23 ½" x 2 ¾" (600mm) 25.2" x 4 ⅜" 11.67 sq. in. 30" 30" x 2 ¾" (762mm) 31.57" x 4 ⅜" 14.82 sq. in. 35" 35 ⅜" x 2 ¾" (900mm) 37.01" x 4 ⅜" 17.48 sq. in. 39" 39 ⅜" x 2 ¾" (1000mm) 40.95" x 4 ⅜" 19.39 sq. in. 47" 47 ¼" x 2 ¾" (1200mm) 48.82" x 4 ⅜" 23.20 sq. in. 59" 59" x 2 ¾" (1500mm) 60.63" x 4 ⅜" 27.01 sq. in. Browse our full range of Side Outlet Linear Drains for Off-Center Plumbing. Compatible optional accessories include ABS, PVC, or Cast Iron CPE membrane fitting, clad flexible coupling, and stainless steel hair trap. Find these and more in our drain accessories and adapters collection. Have more questions about outlet position, sizing, or installation? See our Off-Center Shower Drain Plumbing FAQ. Contact us for contractor pricing and quantity discounts.